‎+7 (499) 500-2460
Moscow, Udaltsova St., 81, bldg 2, office 6
News
Cummins QSK60 and QSK78 exhaust valve kits in stock 11/11/2023

LEVRUS LLC has 16 exhaust valve kits (p/n 5405912 (2881811)) in stock for Cummins QSK60–QSK78 gas and diesel engines. Kit contents Exhaust valve p/n 5542028 (replaces 3641541); Valve collet p/n 3641537 — 32 pcs; Valve seat p/n 4080333 — 16 pcs. The parts were bought from an official dealer in China and imported officially with all the necessary documents.

Turnkey delivery of 80 kVA UPS and battery module for Miratorg data centre by LEVRUS 21/09/2023

LEVRUS LLC has completed a turnkey supply of an 80 kVA UPS and a battery module for the Miratorg data centre. This is the second joint project: in May 2023 the company carried out similar work, and the customer rated the result highly, inviting LEVRUS to a new tender, which was won and completed within a week. In the shortest possible time, LEVRUS specialists delivered the equipment and materials and carried out installation and commissioning at the energy centre of the data centre, which is one of Miratorg's production facilities. The power engineer can now check the status of the UPS and battery bank on a PC without leaving the office, thanks to the installed monitoring system. Scope of supply 528, SKAT-UPS 40-3/3 three-phase uninterruptible power supply, 36 kW, online sine-wave — 2 pcs; 2177, SNMP module CY 504, Ethernet monitoring and management — 2 pcs; 2168, Parallel connection cable for SKAT-UPS — 2 pcs; 8997, SKAT SB 12150FT front-terminal battery, AGM type, 12 V, 150 Ah — 40 pcs; 4408, SKAT TB-42R680PF-B floor-standing universal server cabinet, 42U, 600 x 800 mm, perforated door — 3 pcs; 4484, SKAT TB Shelf S800-B heavy-duty (200 kg) fixed 19" shelf for 800 mm cabinet, black — 11 pcs; 4476, SKAT TB Mounting kit 16, screw + washer + nut fixing kit M6x16 — 44 pcs; 4451, SKAT TB TS thermostat for telecommunications cabinets — 3 pcs; 4481, SKAT TB Fan 4/800-B-TOP ceiling fan module for 4 elements for floor-standing cabinets with an 800 mm depth, black — 3 pcs; 4479, SKAT TB Ground 19" copper earthing busbar — 3 pcs; 4478, SKAT TB Cable 30/4 earthing cable kit (30 cm — 4 pcs; set: nut, washer — 8 pcs) — 1 pc.

Portable Charging Stations from LEVRUS: 300–2500 Wh for Off-Grid Power 08/09/2023

LEVRUS LLC offers portable charging stations — complex portable charging devices (KPZU) with energy capacities from 300 to 2500 Wh. They are designed to charge and maintain the operating capability of: personal communications devices;lighting equipment;tablets;personal computers;drones. These electric power sources can be used in field conditions and significantly simplify power supply compared with conventional generators. KPZU can be charged from the mains, mobile generators and solar panels, which may be included. The devices are equipped with various outputs: USB, Type-C and 220 V.

CAT DE1100GC Diesel Gensets with C32 Engine: 3 in Stock at LEVRUS 30/08/2023

In stock at LEVRUS LLC in Moscow: 3 diesel gensets, CAT DE1100GC, built in 2023 with a C32 engine. Power output — 1000/1100 kVA; voltage — 0.4 kV. DE1100 GC diesel generator sets provide a reliable 1100 kVA, 50 Hz power supply and are intended for prime or standby power at a facility. The diesel gensets are designed in accordance with ISO 8528-5 transient response requirements and can accept 100% of the rated load in a single step. These generator sets offer low fuel consumption.

LEVRUS Supplies Caterpillar Parts for GV Gold Mining 22/08/2023

LEVRUS LLC is developing its relationship with PJSC Vysochaishy (GV Gold), one of Russia’s top ten gold mining companies, with particular care and attention. Under current contracts, the company supplies original Caterpillar parts for diesel power plants and quarry equipment. Current planning covers the delivery of imported diesel gensets, drilling rigs, dump trucks, bulldozers and front-end loaders, together with service support for supplied equipment and equipment already in operation.

UPS modernisation at Miratorg: LEVRUS replaces Riello 60 kVA with SKAT 30 kVA 17/05/2023

LEVRUS has completed modernisation of power equipment at a Miratorg agroholding facility, replacing outdated Riello 60 kVA uninterruptible power supplies (UPS) with new units. Russia’s largest agroholding places strong emphasis on product quality. Miratorg strictly ensures that temperature conditions in its cold stores are maintained without exception, so UPS units are regularly renewed. Contractor requirements are stringent, particularly on lead times. In addition, installing Russian-made equipment is now a priority. LEVRUS solution LEVRUS is accustomed to working under such conditions. Delivery to the Miratorg site was completed precisely on schedule. The specification called for replacement of outdated Riello 60 kVA UPS units. Our specialists proposed the optimum price/quality/speed solution based on SKAT brand equipment from the Russian manufacturer Bastion (Rostov-on-Don). The power system configuration includes: a paired cascade of 30 kVA UPS units; 32 connected batteries. The work carried out by LEVRUS was highly rated by Miratorg management.

LEVRUS and BaiFa Corp hold an official meeting in Moscow 30/03/2023

On 30 March, the LEVRUS office in Moscow hosted an official meeting between an authorised representative of BaiFa Corp (China) and LEVRUS management. The long-standing cooperation with BaiFa began back in 2012 with a visit by LEVRUS General Director Alexey Ivanovich Dobrynin to the BaiFa plant in China. Today, LEVRUS is an official partner of BaiFa in Russia. During the meeting, the parties confirmed the agreements reached earlier and discussed the establishment of a BaiFa finished goods warehouse in Russia.

CAT DE550 400 kW diesel genset from stock in Moscow and C4.4, C7.1, C9 engines 09/03/2023

The regularly restocked LEVRUS LLC warehouse in Moscow has received Caterpillar diesel gensets and CAT industrial engines. The following are currently available: CAT DE550 diesel genset — 400 kW prime power, 440 kW standby power, 400 V; C4.4, C7.1 and C9 industrial engines.

Caterpillar C15 Engines Complete Pre-Sale Preparation and Are Ready for Dispatch 07/02/2023

LEVRUS LLC has completed pre-sale preparation of Caterpillar C15 engines — the equipment is ready for dispatch to the customer. A video review is available at: Video review of Caterpillar C15 engines. C15DI34C15 ACERT DIT-ATAAC IND ENG 34Industrial diesel engine CAT C15 ACERTFLYHG11FLY. HSG SAE NO. 1 11SAE1 flywheel housingAIRLG04AIR INLET SYSTEMIntake manifoldALT2480CHARGING ALT 24V 80 AMPCharging alternator, 24V, 80AALTMT03ALTERNATOR MOUNTING RH 03Generator support, on the rightCBM0009CIRCUIT BREAKER MTG-RH 105 AMPGenerator thermal circuit breaker, 105AFDV0011FAN DRIVE 0.681 RATIO 11Fan drive, ratio 0.681CLS0001COOLANT LEVEL SENSORAntifreeze level sensorEXCAD01STRAIGHT EXHAUST ADAPTERStraight exhaust adapterFLY0010FLYWHEEL- AE NO. 1 10Flywheel SAE1OPTDS02OIL PAN-REAR SUMPOil sump with a deep rear sectionOILDRN1OIL PAN DRAIN VALVE N1Oil drain valveOLGAG01OIL LEVEL GAGE LH REAROil dipstick, rear leftOFL0000OIL FILLER-RHOil filler neck on the rightCRKPL01CRANKSHAFT PULLEY 01Crankshaft pulleyELSMRH0ELEC START MTR RH 24V - 42MTStarter, 24VCDCCC10COOLANT FILTER MOUNTING-RH LOWAntifreeze filter, bottom rightCDCEL03ELEMENT 03Antifreeze filter elementFRSUP05FRONT ENGINE SUPPORT-NARROWFront engine mountFNH0431FAN HEIGHT-431.8 MM (17.00 IN)Fan height 431.8 mmTFFTRR2TERTIARY LINES-LH HIGH MNT R2Tertiary filter, top leftPRESRV16 MO / OVERSEAS PRESERVATIONFactory preservationPFFWS142-PC PRIMARY FILTER/WATER SEPPrimary filter-water separatorCGTOTHRTHROTTLE POSITION SENSOR-OTHERWithout a speed setterEXHFRNTFRONT FACING EXHAUSTExhaust direction – forward, towards the radiatorINDUSTCINDUST INTERMITTENT C RATINGIndustrial rating CINDUSTRINDUSTRIAL ENGINEIndustrial engineNOBRAKENO COMPRESSION BRAKEWithout a compression brakeVLT002424 VOLT24 voltsHP00540540 BHP (403 BKW) W/O FAN540 hp, 403 kWMSINDOEINDUSTRIAL/OEMIndustrial, OEMDPX0002DOMESTIC PACK FOR EXPORTPackaging for export2100RPM2100 RPM2100 RPM.

C7.1 engine supply for a Russian Railways subsidiary 27/01/2023

LEVRUS LLC supplied two C7.1 engines rated at 161 kW (225HP/2200 RPM, EPA Tier 3) to one of Russian Railways’ subsidiaries. RATED OUTPUT Maximum power240 kWMaximum torque1268 N·m at 1400 RPMRated speed2200 RPMMinimum power129 kW GENERAL Engine configurationIn-line, 6-cylinderCylinder bore105 mmPiston stroke135 mmDisplacement7 litresCompression ratio16.5:1Air intakeWith turbocharging and charge air cooling (TA) or standard turbocharging and charge air cooling (TTA)Combustion systemWith direct injectionRPM (flywheel side)AnticlockwiseExhaust gas cleaning systemDOC+DPF+SCR ENGINE DIMENSIONS – APPROXIMATE Length1064 mmWidth798 mmHeight912 mmMass – net dry – basic operating engine without additional equipment752 kg

LEVRUS to supply CAT 773E dump trucks for mining and processing plant 25/11/2022

LEVRUS LLC will supply CAT 773E dump trucks for a mining and processing plant (GOK). The model combines higher power, efficiency and well-planned maintenance. Advantages of CAT 773E over analogues up to 7% more power; increased power transferred to the ground thanks to greater torque and higher speed when travelling on slopes; maximum efficiency; higher efficiency thanks to advanced design methods and software; improved safety; centralised engine and machine controls located at ground level provide safe and easy daily maintenance. CATERPILLAR 773E specifications ENGINEEngine modelCat 3412ERated engine speed2000 RPMGross power according to SAE J1995530 kWNet power according to SAE J1349501 kWUseful power — according to the Cat standard501 kWFlywheel power501 kWNet power in accordance with ISO 9249501 kWUseful power — 80/1269/EEC501 kWUseful power — according to DIN 70020681 PSNumber of cylinders12Torque reserve40%Cylinder bore137 mmPiston stroke152 mmEngine displacement27 lMaximum torque value3434 N·mMASS — APPROXIMATELYDesign gross operating weight of the machine99300 kgChassis weight30200 kgBody weight9210 kgOPERATING CHARACTERISTICSRated load capacity class (100%)55.5 tMaximum speed with load62.2 km/hBody capacity — geometric26.6 m³Body capacity — SAE 2:135.2 m³Rise time9.5 SecondsLowering time12.5 SecondsGEARBOX1st forward gear9.9 km/h2nd forward gear13.9 km/h3rd forward gear18.8 km/h4th forward gear25.2 km/h5th forward gear34.1 km/h6th forward gear45.9 km/h7th forward gear62.2 km/hReverse13.1 km/hON-BOARD GEARBOXESFinal drive ratio3,64:1Gear ratio of the planetary stage4,8:1Overall gear ratio17,48:1BRAKESBrake surface area — front brakes1,395 cm²Brake surface area — rear brakes61269 cm²Standard braking system parametersISO 3450:1996BODY LIFTING MECHANISMSPump delivery — high idle speed491 l/minSafety valve opening pressure — lift17225 kPaSafety valve opening pressure - lowering3445 kPaBody lifting time — high idle speed9.5 SecondsBody lowering time — floating mode12.5 SecondsForced body lowering — high idle speed17.51 SecondsCAPACITY OF THE TWO-SLOPE BODY AT 100% FILL FACTORGeometric26.6 m³Capacity with "cap" 2:1 (SAE)35.2 m³Capacity with "cap" 3:132.4 m³Capacity with "cap" 1:143.3 m³SUSPENSIONCylinder piston power stroke — front suspension234 mmWorking stroke of the cylinder piston — rear suspension149 mmRear axle oscillation8.1 degreesREFUELLING TANK CAPACITYFuel tank700 litresCooling system122 lDifferentials and final drives155 lPower steering system reservoir34 lSteering system (including reservoir)60 lHydraulic tank for torque converter/brake system/body lift133 litresBody lifting system/brake system (including reservoir)307 lTorque converter/gearbox (including oil sump)72 lTorque converter and gearbox53 lEngine crankcase68 lBUSBARSStandard busbars24.00-R35 (E4)ROPS CONSTRUCTIONROPS/FOPS standardsComplies with SAE J1040 standards of May 1994 and ISO 3471:1997SOUNDPROOFStandards regulating noise levelsComplies with SAE J88 standard of April 1995DIMENSIONSHeight — to the top of the ROPS structure4000 mmOverall body length8535 mmLength of the internal part of the body6400 mmOverall length9120 mmWheelbase4191 mmDistance from the rear axle to the rear edge of the body2782 mmGround clearance591 mmUnloading clearance676 mmLoading height — without load3773 mmMaximum internal depth of the body1805 mmOverall height with the body raised8787 mmOperating width5076 mmWidth across the centre lines of the front wheels3275 mmDistance to the engine guard panel667 mmOverall width with canopy4398 mmExternal body width3910 mmInternal body width3658 mmHeight to the front visor4424 mmGround clearance under the rear axle591 mmTrack between the centre lines of the rear pairs of wheels2927 mmOverall tyre width4457 mmAPPROXIMATE MASS VALUES — DOUBLE-SLOPE BODYChassis30,200 kgBody9210 kgStandard lining3900 kgRear axle — without load52.7 %Rear axle — with load66.7 %

CAT Industrial Engines for Oil and Gas Companies 19/10/2022

LEVRUS has received CAT C7.1, C13, C15 and C18 diesel industrial engines. The equipment is aimed at oil and gas company projects and is available for dispatch from stock.

Write to us

We will reply to info@levrus.ru shortly