LEVRUS has been renting out load banks for testing power plants since 2018: from 200 kW to 12 MW, at voltages from 0.4 to 10.5 kV, with rental periods from one day. We select a unit for your generator, deliver it, connect it and carry out the tests.
Why you need a load bank
It is not enough for a generator to simply start. A load bank takes a set amount of power from it and dissipates it as heat, so the plant can be tested the way it will work on site. Rental makes sense when testing is a one-off or occasional task:
- acceptance tests and commissioning of new diesel and gas reciprocating power plants;
- testing standby power at industrial sites, data centres, telecom and healthcare facilities;
- loading after idle time or under-loading: a diesel engine that runs for a long time at low load becomes fouled with carbon deposits, and a load bank helps bring it back to its working regime;
- testing after repair and maintenance, before shipment or commissioning;
- checking a used power plant before purchase;
- testing UPS and guaranteed power systems.
What you can rent
Rental companies most often offer units of up to 500 kW at 0.4 kV. Our range is wider: from compact modules to a 12 MW high-voltage system.
- Thomson Power Systems (Canada), TLB series — we have offered TLB rental since 2018. For example, the TLB-500H-380V-3: 500 kW, 380 V, stepped load control, mobile on four wheels, for use indoors or under a canopy;
- Avtron A34830 (USA) — a 12 MW, 10.5 kV high-voltage system for outdoor installation. Its three units of 3.5, 4.25 and 4.25 MW work together or separately, so you can take only the power you need. No step-up transformers are required, which makes transport and relocation between sites cheaper. The system is rented turnkey, with qualified operators.
If you need more power than one unit provides, the modules can be combined into one system.
How rental works
- Request. You tell us the generator power and voltage, the site address, the dates and the duration. If there are special conditions (night work, a non-standard cable route, noise limits), tell us right away.
- Selection and quote. We choose the unit, calculate the price and agree delivery and payment terms.
- Delivery and connection. Our specialists bring the unit, connect it and check it is ready for operation.
- Testing. We apply the load according to the customer's procedure, in steps or straight to the set power. When the work is done, the unit is disconnected and removed.
It is best to submit your request in advance so that we can reserve a unit for your dates.
What to prepare on site
- a place for the unit. The air leaving the unit is very hot, so it needs clear space, and the hot exhaust must not return to the intake;
- a connection point and a cable route. We check the correct A-B-C phase sequence during connection;
- generator data: power, voltage, frequency and operating mode.
How much rental costs
The price depends on the power of the unit, the duration and the location. Terms differ for a one-off test of a few hours, shift work over several weeks and round-the-clock operation for months. To get a quote right away, prepare the address, the rental period and the generator power.
Rent, buy or have it built
If you test regularly, buying a unit is more cost-effective. LEVRUS supplies Thomson and Avtron units and builds its own load banks to the customer's specification, with resistive and inductive load, including high-voltage versions up to 10.5 kV. See ready-made models with prices in the load bank catalogue. Need the power plant itself too? We will design, install and start it up, and test it with our own load equipment.
Call +7 (499) 500-24-60 or write to info@levrus.ru to select a unit and get a quote.


