‎+7 (499) 500-2460
Moscow, Udaltsova St., 81, bldg 2, office 6
Load banks

LEVRUS load bank module - NM-30kW-380 V-3-K

  • Brand: LEVRUS
  • Product Code: LEVRUS - NM-30kW-380V-3-K
  • Availability: In Stock
430 000 ₽

Load module LEVRUS - NM-30kW-380 V-3-K (30 kW)

Composition and characteristics of the load equipment LEVRUS - NM-30kW-380 V-3-K

Equipment name

Load module LEVRUS - NM-30kW-380 V-3-K

Power

30 kW

Rated power of steps

3 x 10 kW;

Steps can be increased or decreased smoothly or abruptly; power can be switched on either sequentially (for example, adding 10/20/30 kW) or increased immediately to 30 kW and reduced immediately to 10 kW — depending on the test procedure requirements.

Type of electrical load

Active resistive load

Type of current in power circuit

Three-phase alternating current, 50 Hz

Rated voltage

~400 V

Power factor, cos (ϕ)

0.99

Phase connection type

Star

Operating mode

Continuous

Ambient air temperature during operation of the load module

-25...+35 °C

Emergency protection

Full protection:

-overheat protection;

-fan failure protection;

-airflow protection (AFP) and RCD;

-short-circuit protection;

-emergency stop button.

Forced air cooling

Three-phase axial fan powered from the source being loaded.

Cooling air flow direction

Horizontal

Control system

Built-in control panel. The control cabinet panel is intended for manual control of the load module and indication of operating and fault modes.

Recording of electrical operating parameters

Digital three-phase multimeter SATEC or equivalent (optional) RUB 30,000 incl. VAT

Protection rating of the distribution board / control panel

IP 54

Insulation resistance

In accordance with the requirements of the technical specifications and the Electrical Installation Code.

Insulation class

1 kV (1000 V)

Resistive elements

Finned nichrome (NiCr 80/20) heating elements (steel with ceramic insulators), Russia.

Circuit breakers

Contactors manufactured by IEK or equivalent; other brands by agreement, with a corresponding change in price.

Noise level outside the container, not more than

80 dBA

Painting

Powder coating, RAL 5017 or in accordance with the technical specification

Earthing of the load module

Two terminals (M10 threaded hole) on the outside of the load module enclosure

Climatic design / Operation

UHL1. Operation outdoors is possible. All-weather enclosure, enclosure protection rating — IP 54 (with 4 bolts).

Transportation

Resistance to transportation by ground

transport.

Overall dimensions, not more than

Length 850 mm / Width 1000 mm / Height 1000 mm

Weight, not more than

150 kg

Documentation

Full set of documents in Russian, including the operation manual, electrical connection diagram, certificate of conformity, load module data sheet

Maintainability

Collapsible construction, full

maintainability

Maintenance

Does not require special maintenance.

Design service life

At least 12 years subject to compliance with storage and operating conditions


Load module design

The 30 kW, 400 V load module consists of a single load unit in a metal box on a frame, on a chassis; the control panel is mounted inside the enclosure. The load bank enclosure is made of St08SS sheet metal at least 1.5 mm thick.

The load module LEVRUS - NM-30kW-380 V-3-K in an enclosure and the control panel will comply with the requirements set out in your specification:

 metal enclosure on a frame for indoor installation with removable and opening panels for easy access to the interior of the module, with degree of protection IP 54 and control panel degree of protection — IP 54

 resistive load element block

 control and monitoring cabinet with instrument panel

 switching and connection block

 terminal block for connecting power sources

 axial fan


The load module LEVRUS - NM-30kW-380 V-3-K will be supplied with a certificate, product passport and operating manual.

* A long service life is possible only if the correct operating conditions described in the instruction manual are observed.

The 30 kW load module is supplied assembled and fully ready for further operation; it does not require additional installation on site (except for connecting the cable to the power source being loaded and to the earthing circuit).


Main

Write to us

We will reply to info@levrus.ru shortly