LEVRUS load module – NM-500KVT-380V-3-K (500 kW)
Composition and characteristics of the LEVRUS -NM-500kW-380 V-3-K load equipment | |||
Equipment name | Load module LEVRUS- NM-500kW-380 V-3-K | ||
Power | 500 kW | ||
Rated power of steps | 10 x 50 kW; The steps can be increased or decreased smoothly or abruptly, and power can be switched on both sequentially (for example, adding 50/300/500 kW) and increased immediately to 500 kW and reduced immediately to 50 kW — depending on the required test procedure. | ||
Type of electrical load | Active resistive load | ||
Power circuit current type | Three-phase alternating current at 50 Hz | ||
Rated voltage | ~400 V | ||
Power factor, cos (ϕ) | 0.99 | ||
Phase connection type | Star | ||
Operating mode | Continuous | ||
Ambient air temperature during operation of the load module | -25...+35 °C | ||
Emergency protection | Full protection: -overheating protection; -fan failure protection; -air flow protection (AFP) and RCD; -short-circuit protection; -emergency stop button. | ||
Forced air cooling | Three-phase axial fan powered from the source under test. | ||
Cooling air flow direction | Horizontal | ||
Control system | Built-in control panel. The control cabinet panel is intended for manual control of the
Write to usWe will reply to info@levrus.ru shortly
Levrus — support
Connecting…
| ||




