‎+7 (499) 500-2460
Moscow, Udaltsova St., 81, bldg 2, office 6
Load banks

LEVRUS load module - NM-200KW-380V-3-K (200 kW)

  • Brand: LEVRUS
  • Product Code: LEVRUS - NM-200kW-380V-3-K
  • Availability: In Stock
780 000 ₽

Load module LEVRUS - NM-200kW-380 V-3-K (200 kW)


Composition and specifications of the load bank equipment NM-200kW-380 V-3-K

Equipment name

Load bank module NM-200kW-380 V-3-K

Power

200 kW

Rated power of the steps

4 x 50 kW

The steps can be increased or decreased smoothly or abruptly, and power can be switched on either sequentially (for example, adding 50/100/200 kW at a time) or raised at once to 200 kW and reduced at once to 50 kW, depending on the requirements of the test procedure.

Type of electrical load

Active resistive load

Type of current in the power circuit

Three-phase alternating current, 50 Hz

Rated voltage

~400 V

Power factor, cos (ϕ)

0.99

Phase connection type

Star

Operating mode

Continuous

Ambient air temperature during operation of the load module

-25...+35 °C

Fault protection

Full protection:

- overheat protection;

- fan fault protection;

- air flow protection (AFP) and RCD;

- short-circuit protection;

- emergency stop button.

Forced air cooling

Three-phase axial fan supplied from the source under test.

Direction of the cooling air flow

Horizontal

Control system

Built-in control panel. The control cabinet panel is intended for manual control of the load module and indication of operating and fault modes.

Recording of electrical operating parameters

Digital three-phase multimeter SATEC or equivalent (optional), installation cost RUB 60,000 including VAT

Degree of protection of the input distribution board / control panel

IP 54

Insulation resistance

In accordance with the requirements of the technical specifications and the Electrical Installation Regulations.

Insulation class

1 kV (1000 V)

Resistive elements

Finned nichrome (NiCr 80/20) heating elements (steel with ceramic insulators), Russia.

Circuit breakers

Contactors manufactured by IEK or equivalent; other brands by agreement, with a corresponding change in price.

Noise level outside the container, no more than

80 dBA

Paint finish

Powder coating, RAL 5017 or in accordance with the technical specification

Earthing of the load module

Two terminals (M10 threaded hole) on the outside of the load module enclosure

Climatic design / Operation

UHL1. Outdoor operation is possible. All-weather enclosure, enclosure protection rating — IP 54 (with 4 bolts).

Transportation

Resistance to transportation by land

transport.

Overall dimensions, no more than

Length 1000 mm / Width 800 mm / Height 1600 mm

Weight, no more than

270 kg

Documentation

A complete set of documents in Russian, including the operation manual, electrical connection diagram, certificate of conformity and load module data sheet

Maintainability

Collapsible modular construction, fully

maintainable

Maintenance

Requires no special maintenance.

Design service life

At least 12 years subject to compliance with storage and operating conditions

Design of load module NM-200KVT-380V-3-K

The 200 kW, 400 V load module consists of a single load unit in a metal box on a frame, on a chassis; the control panel is mounted inside the enclosure. The body of the load bank is made of St08PS sheet metal with a thickness of at least 1.5 mm.

The load module NM-200KVT-380V-3-K in the enclosure and the control panel will comply with the requirements set out in your specification:

 metal enclosure on a frame for indoor installation with removable and opening panels for easy access inside the module, with protection rating IP 54 and control panel protection rating IP 54

 resistive load element unit

 control and monitoring cabinet with instrument panel

 switching and connection unit

 terminal unit for connecting power sources

 axial fan

The load module NM-200KVT-380V-3-K will be supplied with a certificate, data sheet and operating manual.

* A long service life is only possible subject to the correct operating conditions described in the instructions.

The 200 kW load module is supplied fully assembled and completely ready for further operation; no additional installation on site is required (apart from connecting the cable to the power source under load and to the earthing circuit).


Main

Write to us

We will reply to info@levrus.ru shortly