Load module LEVRUS - NM-100kW-380 V-3-K (100 kW)
Composition and characteristics of the LEVRUS - NM-100kW-380 V-3-K load equipment | |
Equipment name | Load module LEVRUS - NM-100kW-380 V-3-K |
Power | 100 kW |
Rated power of steps | 10 x 10 kW; Steps can be increased or decreased smoothly or abruptly; power can be switched on both sequentially (for example, adding 10/50/100 kW at a time) and raised immediately to 100 kW and reduced immediately to 10 kW — depending on the test procedure requirements. |
Type of electrical load | Active resistive load |
Power circuit current type | Three-phase alternating current, 50 Hz |
Rated voltage | ~400 V |
Power factor, cos (ϕ) | 0.99 |
Phase connection type | Star |
Operating mode | Continuous |
Ambient air temperature during operation of the load module | -25...+35 °C |
Emergency protection | Full protection: - overtemperature protection; - fan failure protection; - air flow protection (AFP) and RCD; - short-circuit protection; - emergency stop button. |
Forced air cooling | Three-phase axial fan powered from the source under load. |
Cooling air flow direction | Horizontal |
Control system | Built-in control panel. The control cabinet panel is intended for manual control of the load module and indication of operating and emergency modes. |
Recording of electrical operating parameters | Digital three-phase multimeter SATEC or equivalent (optional) 60 000 RUB including VAT |
Protection rating of the input distribution device / control panel | IP 54 |
Insulation resistance | In accordance with the requirements of the technical specifications and the Electrical Installation Code. |
Insulation class | 1 kV (1000 V) |
Resistive elements | Finned nichrome (NiCr 80/20) heating elements (steel with ceramic insulators), Russia. |
Circuit breakers | Contactors manufactured by IEK or equivalent; other brands by agreement, with a corresponding price adjustment. |
Noise level outside the container, no more than | 80 dBA |
Painting | Powder coating, RAL 5017 or in accordance with the technical specification |
Earthing of the load module | Two terminals (M10 threaded hole) on the outside of the load module enclosure |
Climatic version / Operation | UHL1. Operation outdoors is possible. All-weather enclosure, enclosure protection rating — IP 54 (with 4 bolts). |
Transportation | Resistance to transportation by ground transport. |
Overall dimensions, no more than | Length 1000 mm / Width 1000 mm / Height 1000 mm |
Weight, no more than | 250 kg |
Documentation | Full set of documents in Russian, including the operating manual, electrical connection diagram, certificate of conformity, load module data sheet |
Maintainability | Collapsible design, full maintainability |
Maintenance | Does not require special maintenance. |
Design service life | At least 12 years subject to compliance with storage and operating conditions |
Design of load module LEVRUS - NM-100kW-380 V-3-K (100 kW)
The 100 kW, 400 V load module consists of a single load unit in a metal box on a frame, on a chassis; the control panel is mounted inside the enclosure. The body of the load complex is made of sheet metal St08SS with a thickness of at least 1.5 mm.
The LEVRUS - NM-100kW-380 V-3-K load module in the enclosure and the control panel will comply with the requirements set out in your specification:
metal enclosure on a frame for indoor installation with removable and opening panels for easy access inside the module, with protection rating IP 54 and control panel protection rating — IP 54
load resistive element unit
control and monitoring cabinet with instrument panel
switching and connection unit
terminal unit for connecting power sources
axial fan
The LEVRUS - NM-100kW-380 V-3-K load module will be supplied complete with a certificate, passport and operating manual.
* A long service life is only possible if the correct operating conditions described in the instruction manual are observed.
The 100 kW load module is supplied assembled and fully ready for further operation and does not require additional installation on site (except for connecting the cable to the power source under load and to the earthing circuit).




