The Shtil IC-SNMP/WEB interface expansion board is intended for local or remote monitoring, configuration and testing of Shtil equipment:
- single-phase and three-phase InStab series inverter voltage stabilisers, universal (floor/rack) design, 1 - 20 kVA;
- single-phase UPS of the ST, SR, SW and STR series, 0.25 - 10 kVA.
The front panel of the expansion board has the following connectors:
- USB – connection to a PC;
- Ethernet (TCP/IP adapter) – connection to a PC or network switch;
- “alarm” (“dry” contacts) – generation of signals for mains failure, transition to bypass mode and deep battery discharge;
- RS-485 – monitoring of external devices via a proprietary protocol.
Below the row of external connectors are the indication and control elements:
- green “Power” LED – shows the operating mode/status of the UPS/stabiliser;
- blue “Communication” LED – indicates the interface status between the UPS/stabiliser controller and the expansion board;
- “Reset” button – reboots the software and resets settings to factory defaults.
Monitoring and control via the IC-SNMP/WEB module can be performed in two ways:
- using the dedicated ShtylDeviceManager software;
- via the WEB interface using a browser.
With either connection method, you can obtain information about the status of the UPS/stabiliser and its parameters, change settings and view the event log. Thanks to SNMP protocol support, notifications about important events can be configured to be sent to four user-selected IP addresses.




