‎+7 (499) 500-24-60
Moscow, Udaltsova St., 81, bldg 2, office 6
Single-phase UPS

UPS ST1101L (1000 VA)

  • Brand: Shtil
  • Product Code: ST1101L
  • Availability: In Stock
28 430 ₽

Online UPS ST1101L is used to ensure uninterrupted operation and reliable protection of single-phase electrical equipment with total power up to 31000 VA / 900 W in cases of mains voltage failure.

Thanks to the improved power factor correction algorithm, the ST1101L model works excellently in conjunction with diesel gensets.

ST1101L is a UPS with double-conversion technology, which allows the device to stabilise the input voltage over a wide range (90-295 V) and with high accuracy (±2 %) without switching to battery, to switch load power to the battery instantly and without interruption when mains voltage is lost, and to supply the load with a perfect sinusoidal voltage.

Installation and connection

ST1101L has a compact metal enclosure intended for floor placement. The device is installed on any flat horizontal surface.

For connecting electrical equipment, the model has a European socket and three C13 “computer” connectors.

The UPS is connected to the mains via the C14 connector.

Autonomous operation

ST1101L has a built-in charger (current 5 A) and a dedicated connector for connecting external batteries.

Control panel

Monitoring and adjustment of the main operating parameters of the product is carried out using a control panel with an LCD display, four function keys and five LED indicators.

Cooling system

The device is cooled by two low-noise fans with adaptive operation mode.

Protection

The ST1101L UPS uses a modern multi-level protection system and electronic bypass.

Monitoring tools

ST1101L offers extensive capabilities for organising local/remote monitoring and control. For this purpose, expansion cards are connected to the UPS; they are purchased separately.

The operation of the UPS with an installed card can be monitored directly in a web browser or in the Shtyl Device Manager (SDM) program.


Built-in batteries
Battery type sealed, maintenance-free, lead-acid
Built-in batteries no
Support for connecting external batteries yes
General specifications
Current AC
Apparent power, kVA 1
Active power, kW 0,9
Form factor floor-standing
Country of manufacture Russia
Main
Topology on-line
Input characteristics
Generator compatibility yes
Input mains type single-phase three-wire (L, N, PE)
Operating input voltage range, V 175-295 at 100% load, 155-295 at 75% load, 120-295 at 50% load
Rated input frequency, Hz 50
Rated input voltage, V 220
Soft start yes
Output characteristics
Efficiency, % in on-line mode 95, when operating via bypass or in ECO mode 99, in battery mode 86
Output voltage type single-phase
Rated output frequency, Hz при работе от сети – соответствует частоте сети при работе от АБ – устанавливается пользователем: 50/60 (по умолчанию – 50)
Rated output voltage, V 220
Stabilisation accuracy, % ±2
Control panel and interfaces
Audible alarm battery mode (every 4 s), low battery voltage (every 2 s), battery disconnected/fully discharged/needs replacement (every 0,5 s), overload and UPS fault (continuous)
Indication status, mains, bypass, inverter, batteries
LCD display display of system operating status and main input and output parameters
Options RS-232, mini-USB, USB, Ethernet, RS-485, «Dry» contacts
Connection
Input mains IEC-320-C14
Load (output sockets) IEC-320-C13 (3 pcs.), EURO F-type with grounding (1 pc.)
Reliability and performance characteristics
Cooling type forced air cooling (built-in fan with speed control)
Degree of protection against dust and moisture IP20
Installation indoor
Protection Output overload, Short circuit, Overheating, Surge protection, High-frequency noise protection, Deep battery discharge protection, UPS fault protection, Electronic automatic bypass
Temperature range, °C operating temperature from +5 to +40, storage temperature from -40 to +40
Warranty period, months 24

Write to us

We will reply to info@levrus.ru shortly