‎+7 (499) 500-24-60
Moscow, Udaltsova St., 81, bldg 2, office 6
Single-phase UPS

UPS ST1110SL (10 kVA)

  • Brand: Shtil
  • Product Code: ST1110SL
  • Availability: In Stock
230 410 ₽

The ST1110SL online UPS is used for uninterrupted operation and reliable protection of single-phase electrical equipment with a total capacity of 10 kVA / 8 kW in the event of a mains voltage failure.
Thanks to an improved power factor correction algorithm, the ST1110SL model operates excellently in combination with diesel gensets.
The ST1110SL is a double-conversion UPS, which allows the device to stabilise the input voltage over a wide range (90-295 V) and with high accuracy (±2 %) without switching to the battery, to transfer the load supply to the battery instantly and without interruption when the mains voltage fails, and to supply the load with a perfect sine-wave voltage.
Installation and connection
The ST1110SL has a compact metal housing designed for floor placement (tower).The device is installed on any level horizontal surface on swivel castors.
For connecting electrical equipment, the model has terminal blocks located on the rear panel of the enclosure. Connection to the input mains is made via terminal blocks.
Standalone operation
The ST1110SL model has built-in 9 Ah batteries and a charger (current 4 A).
Control panel
Control and adjustment of the main operating parameters of the product is carried out using a control panel with an LCD display, four function keys and five LED indicators.
Cooling system
The device is cooled by two low-noise fans with an adaptive operating mode.
Protection
The ST1110SL UPS uses a modern multi-level protection system and an electronic bypass.
Monitoring facilities
ST1110SL has extensive capabilities for organising local/remote monitoring and control of operation. For this purpose, expansion boards are connected to the UPS, which are purchased separately.
The operation of the UPS with an installed board can be monitored directly in a web browser or in the Shtyl Device Manager (SDM) program.

Built-in batteries
Battery type sealed, maintenance-free, lead-acid
Built-in batteries yes
Support for connecting external batteries yes
General specifications
Current AC
Apparent power, kVA 10
Active power, kW 8
Form factor floor-standing
Country of manufacture Russia
Main
Topology on-line
Input characteristics
Generator compatibility yes
Input mains type single-phase three-wire (L, N, PE)
Operating input voltage range, V 175-295 at 100% load, 155-295 at 75% load, 120-295 at 50% load
Rated input frequency, Hz 50
Rated input voltage, V 220
Soft start yes
Output characteristics
Efficiency, % in on-line mode 95, when operating via bypass or in ECO mode 99, in battery mode 94
Output voltage type single-phase
Rated output frequency, Hz при работе от сети – соответствует частоте сети при работе от АБ – устанавливается пользователем: 50/60
Rated output voltage, V 220
Stabilisation accuracy, % ±2
Control panel and interfaces
Audible alarm battery mode, low voltage of internal and/or external batteries, battery disconnected/fully discharged/needs replacement, overload and UPS fault
Indication status, mains, bypass, inverter, battery
LCD display display of system operating status and main input and output parameters
Options RS-232, mini-USB, USB, Ethernet, RS-485, «Dry» contacts
Connection
Input mains terminal connection (L, N, PE)
Load (output sockets) terminal connection (L, N, PE)
Reliability and performance characteristics
Cooling type forced air cooling (built-in fan with speed control)
Degree of protection against dust and moisture IP20
Installation indoor
Protection Output overload, Short circuit, Overheating, Surge protection, High-frequency noise protection, Deep battery discharge protection, UPS fault protection, Electronic automatic bypass
Temperature range, °C operating temperature from +5 to +40, storage temperature from -40 to +40
Warranty period, months 24

Write to us

We will reply to info@levrus.ru shortly