The SR1103TL online UPS is used to ensure uninterrupted operation of single-phase electrical equipment with a total capacity of 3 kVA / 2.7 kW in the event of a mains voltage failure.
Thanks to the improved power factor correction algorithm, the SR1103TL model works excellently in combination with diesel gensets.
The SR1103TL is a UPS with double conversion technology, which allows the device to stabilise the input voltage over a wide range (90-295 V) and with high accuracy (±2 %) without switching to battery, to switch the load supply to the battery instantly and without interruption when the mains voltage fails, and to supply the load with a perfect sinusoidal voltage.
Installation and connection
The SR1103TL is installed in 19-inch rails of telecommunications cabinets or racks.
For connecting electrical equipment, the model has three C13 computer sockets and terminal blocks. The UPS is powered via terminal connections.
Battery operation
The SR1103TL operates in battery mode using external batteries and a built-in charger (4 A current).
Control panel
Monitoring and adjustment of the main operating parameters of the product is carried out using a control panel with an LCD display, four function keys and five LED indicators.
Cooling system
The device is cooled by two low-noise fans with an adaptive operating mode.
Protection
The SR1103TL UPS uses a modern multi-level protection system and an electronic bypass.
Monitoring tools
The SR1103TL offers extensive capabilities for organising local/remote monitoring and control of operation. For this purpose, expansion cards are connected to the UPS; these are purchased separately.
The operation of the UPS with the installed card can be monitored directly in a web browser or in the Shtyl Device Manager (SDM) program.
| Built-in batteries |
| Battery type |
sealed, maintenance-free, lead-acid |
| Built-in batteries |
no |
| Support for connecting external batteries |
yes |
| General specifications |
| Current |
AC |
| Apparent power, kVA |
3 |
| Active power, kW |
3 |
| Form factor |
rack-mount |
| Country of manufacture |
Russia |
| Main |
| Topology |
on-line |
| Input characteristics |
| Generator compatibility |
yes |
| Input mains type |
single-phase three-wire (L, N, PE) |
| Operating input voltage range, V |
175-295 at 100% load, 155-295 at 75% load, 120-295 at 50% load |
| Rated input frequency, Hz |
50 |
| Rated input voltage, V |
220 |
| Soft start |
yes |
| Output characteristics |
| Efficiency, % |
in on-line mode 95, when operating via bypass or in ECO mode 99, in battery mode 86 |
| Output voltage type |
single-phase |
| Rated output frequency, Hz |
при работе от сети – соответствует частоте сети
при работе от АБ – устанавливается пользователем: 50/60 |
| Rated output voltage, V |
220 |
| Stabilisation accuracy, % |
±2 |
| Control panel and interfaces |
| Audible alarm |
battery mode, low voltage of internal and/or external batteries, battery disconnected/fully discharged/needs replacement, overload and UPS fault |
| Indication |
status, mains, bypass, inverter, battery |
| LCD display |
display of system operating status and main input and output parameters |
| Options |
RS-232, mini-USB, USB, Ethernet, RS-485, «Dry» contacts |
| Connection |
| Input mains |
terminal connection (L, N, PE) |
| Load (output sockets) |
IEC-320-C13 (3 pcs.), terminals |
| Reliability and performance characteristics |
| Cooling type |
forced air cooling (built-in fan with speed control) |
| Degree of protection against dust and moisture |
IP20 |
| Installation |
indoor |
| Protection |
Output overload, Short circuit, Overheating, Surge protection, High-frequency noise protection, Deep battery discharge protection, UPS fault protection, Electronic automatic bypass |
| Temperature range, °C |
operating temperature from +5 to +40, storage temperature from -40 to +40 |
| Warranty period, months |
24 |