The SR1101SL UPS with online topology ensures uninterrupted operation and high-quality protection against mains voltage fluctuations for a single-phase load of up to 1000 VA /900 W.
The SR1101SL model works excellently in combination with diesel gensets thanks to the improved power factor correction algorithm.
Thanks to double energy conversion, the SR1101SL UPS provides a stable input voltage over a wide range (90-295 V) without switching to the battery, instant and seamless transfer of the load to the battery when the mains voltage fails, and supplies the load with an ideal sinusoidal voltage at an accurate value.
Cooling is provided by a low-noise fan whose speed depends on the load level.
Installation and connection
The SR1101SL is a rack-mount unit and is installed in the 19-inch rails of telecommunications cabinets and racks.
Two types of socket are provided for connecting the load: a Schuko socket (1 pc.), C13 “computer” sockets (3 pcs.). A C14 connector is used for connecting the input AC voltage.
Control panel
Monitoring and adjustment of the main operating parameters of the unit is performed using an LCD display, four function keys and five LED indicators.
Autonomous operation
Autonomous operation of connected devices is provided by built-in batteries (9 Ah) and a charger (current 1 A). At 100 % load the batteries will provide backup power to the load for 5 minutes.
Protection
The SR1101SL UPS uses a modern multi-level protection system with automatic restart of the UPS after the cause of the fault has been eliminated.
Monitoring tools
On the rear panel of the UPS enclosure there are two slots for installing boards that allow local/remote monitoring of the device. Four board models with interfaces are available:
RS-232 (Megatec protocol);
RS-485 (Modbus RTU/Shtil protocols);
USB and mini-USB;
Ethernet (Web/SNMP/NTP/Modbus TCP/Shtil protocols);
“dry” contacts.
After installing the board, monitoring and control of the UPS can be performed in two ways: via a web browser or with the Shtyl Device Manager (SDM) software.
The boards are not included in the standard scope of supply and are purchased separately.







