‎+7 (499) 500-2460
Moscow, Udaltsova St., 81, bldg 2, office 6
Uninterruptible power supplies

UPS SW500L (500 VA)

  • Brand: Shtil
  • Product Code: SW500L
  • Availability: In Stock
24 790 ₽

The SW500L UPS provides reliable protection against unstable voltage for appliances with a capacity of 500 VA / 400 W.
In the SW500L UPS model, the power factor correction algorithm has been improved, which allows the device to function fully in conjunction with petrol and diesel generators.
The SW500L UPS operates on the basis of double power conversion, which makes it possible to perform voltage stabilisation over an extended range (90-295 V) with high accuracy (±2 %) and without switching to autonomous mode, to instantly transfer the load power supply to the battery when the mains parameters go outside the permissible range, and to supply consumers with voltage with a perfect sine wave.
The SW500L UPS is equipped with a conventional cooling system that operates absolutely silently.
Installation and connection
The SW500L is installed on any flat vertical surface using a special bracket on the rear panel of the UPS.All fasteners are included in the device's scope of supply.
The load is connected to the UPS via a Schuko socket. The device is connected to the mains using a cord with a Schuko plug.
Battery operation
The SW500L UPS is equipped with a built-in charger (5 A current) and the facility to connect external lead-acid batteries (no more than 100 Ah), which provide the required battery operation time for the load (up to 2 hours 40 minutes at 100 % load).
The SW500L uses modern technologies to reduce charging time and extend battery service life.
Protection
The SW500L is equipped with a multi-level protection system with auto-recovery and an electronic bypass.
Control panel
Parameter monitoring and operating settings are performed using the control and indication panel.It includes an LCD display, four control buttons and five LEDs: Status, Mains, Bypass, Inverter, Battery.
Special buttons allow you to select the operating mode: online, bypass or ECO.
Monitoring tools
The UPS model is equipped with a slot for installing remote/local monitoring cards, which support the following interfaces:
RS-232;
USB or mini-USB;
dry contacts;
Ethernet (protocols: Web/ SNMP/ NTP/ Modbus TCP/ Shtil, etc.);
With the card installed, UPS operation is conveniently monitored directly through a web browser or the Shtyl Device Manager (SDM) program.The card is not included in the standard UPS package and is purchased separately.

Built-in batteries
General specifications
Main
Input characteristics
Output characteristics
Control panel and interfaces
Connection
Reliability and performance characteristics

Write to us

We will reply to info@levrus.ru shortly