‎+7 (499) 500-2460
Moscow, Udaltsova St., 81, bldg 2, office 6
Voltage stabilizers

Voltage stabilizer IS1500 (1500 VA)

  • Brand: Shtil
  • Product Code: IS1500
  • Availability: In Stock
17 250 ₽

The single-phase IS1500 inverter-type voltage stabiliser with a power of 1500 VA/1125 W protects household and office equipment from fluctuations and surges in mains voltage. It is available in two output voltage versions – 220 and 230 V.

The stabiliser is manufactured in Russia and has a 2-year manufacturer's warranty. It is excellent for the operation of electrical appliances in Russian power grids. The quality of the device's operation is confirmed by a Customs Union certificate of conformity (EAC).

IS1500 — a stabiliser with improved properties. The main difference lies in the double conversion of electricity, which allows mains voltage correction over a wide range (90-310 V) and creates an output voltage with increased accuracy (± 2 %), as well as ensuring uninterrupted power supply to the load for 200 ms in the event of a power outage.

The IS1500 stabiliser is equipped with a convection and fan (combined) cooling system.
Convection cooling operates until the internal temperature of the stabiliser reaches a critical level. In this case, the fans then start operating.

Convection cooling operates until the internal temperature of the stabiliser reaches a critical level. In this case, the fans then start operating.


Installation and connection
The IS1500 model is intended for wall mounting - it is attached to the wall using self-tapping screws.
It is connected to the mains using a mains cable with a Euro plug. The load is powered from the stabiliser through a Euro socket.


Indication
The operation of the device can be monitored via the "Normal" and "Fault" LED indicators.
The LCD display located on the front side of the housing shows input/output voltage values, the load on the device, reports overload, power, and temperature inside the device.


Protection
The IS1500 stabiliser has comprehensive electronic protection against overload, short circuits, undervoltage/overvoltage, and internal malfunctions of the device.
After the problems are eliminated, the device automatically restores its operation.
The built-in varistor (2 kV, 1/50 μs) provides protection against surge overvoltages. Protection against high-frequency interference in the range 100 kHz – 30 MHz is provided by mains filters.
The device has an automatic bypass for powering the load directly from the mains in cases of overload or internal faults of the stabiliser.



General specifications
Input characteristics
Output characteristics
Control panel and interfaces
Connection
Reliability and performance characteristics

Write to us

We will reply to info@levrus.ru shortly