‎+7 (499) 500-2460
Moscow, Udaltsova St., 81, bldg 2, office 6
Voltage stabilizers

IS2500RT voltage stabilizer (2500 VA)

  • Brand: Shtil
  • Product Code: IS2500RT
  • Availability: In Stock
31 580 ₽

Voltage stabiliser IS2500RT with a capacity of 2500 VA / 2000 W, inverter type, is used to protect a wide range of household, specialised and commercial electrical appliances from poor-quality mains voltage.

The device is manufactured in Russia and is available in two modifications, 220 and 230 V. It is designed for operation in Russian electrical networks. Its performance quality is confirmed by a Customs Union conformity certificate (EAC). The manufacturer provides a warranty for the device for 2 years.

The device is equipped with modern characteristics and a special stabilisation principle – double conversion of electricity, which ensures an instantaneous response (0 ms) to any deviations in mains parameters with maximum accuracy (±2 %) over a wide input voltage range (90-310 V). It also has an output voltage with a perfect sine wave and the ability to provide uninterruptible power to connected devices in the event of a possible power outage (up to 200 ms).

IS2500RT features intelligent cooling, represented by two low-noise fans with adaptive speed.

Installation and connection

The stabiliser is installed using the mounting parts supplied in the kit - vertically on support feet or using brackets in 19-inch rack or cabinet guides.

For connection to the mains, the device is equipped with a mains cable with a Euro plug. The load can be connected to the stabiliser via "computer" sockets IEC-320-C13 – 3 pcs or a EURO F-type Euro socket – 1 pc.

Indication

To monitor operation and the state of the electrical network, signal LEDs "Normal" and "Fault" are installed on the front panel of the stabiliser.

The LCD display shows basic information on input and output voltage values, the device load level and its internal temperature, the power consumption of connected devices, and alarm messages.

Protection

Electronic protection is provided by a built-in electronic bypass (allows the load to continue to be powered directly from the mains during overload), input and output filters (protect the load from high-frequency interference in the range 100 kHz - 30 MHz), and a built-in varistor (2 kV, 1/50 µs), which provides protection against surge overvoltages.

Monitoring tools

The stabiliser has a slot for installing one of the supported expansion boards, which contain the following interfaces:

RS-232;

USB or mini-USB;

"dry" contacts;

Ethernet (protocols: SNMP/Web /Modbus TCP).

Installing the expansion board enables configuration and local/remote monitoring of the voltage stabilizer's status via the web interface or Shtyl Device Manager – specially developed monitoring software.


General specifications
Input characteristics
Output characteristics
Control panel and interfaces
Connection
Reliability and performance characteristics

Write to us

We will reply to info@levrus.ru shortly