‎+7 (499) 500-2460
Moscow, Udaltsova St., 81, bldg 2, office 6
Voltage stabilizers

Set of IS5000RT stabilizers in a rack (15 kVA)

  • Brand: Shtil
  • Product Code: IS5000RT
  • Availability: In Stock
54 770 ₽

A ready-made solution for protection against unstable mains voltage in a 380 V network is a set of three single-phase IS5000RT stabilisers in a rack with a total power consumption of up to 15 kVA / 13.5 kW

The stabiliser is manufactured in Russia and is perfectly adapted to the specifics of Russian power grids.

The quality of the device's operation is confirmed by the Customs Union certificate of conformity (EAC). The manufacturer provides a 2-year warranty.

The device is equipped with a special stabilisation principle – double conversion of electricity, which ensures an instantaneous response (0 ms) to any deviations in mains parameters with maximum accuracy (±2 %) over a wide input voltage range (90-310 V). It also has an output voltage with a perfect sine wave and the ability to provide uninterrupted power supply to connected devices in the event of a possible power outage (up to 200 ms).


Installation and connection

The IS5000RT stabilisers are installed in a metal two-frame 12U-high rack designed for open and compact placement of 19-inch standard specialised equipment.

The devices can also be installed vertically on a flat horizontal surface using special stops. All mounting parts are included in the device's delivery package.

Each stabiliser is connected to a separate supply phase (in the absence of three-phase electrical appliances), which increases the system's resilience to power supply faults: a failure of one phase will not affect the operation of the other two.

The IS5000RT models feature a rotatable control panel: when the device's position is changed (from vertical to horizontal or vice versa), its position can also be changed for more convenient use.

Terminal blocks located on the rear panel are used for connection to the mains and for powering the load.


Indication

To monitor the operation and state of the power grid, the stabiliser's front panel has "Normal" and "Fault" indicator LEDs.

The LCD display shows the main information about input and output voltage values, the device's load level and its internal temperature, the power consumption of connected devices, and alarm messages.


Cooling

Each stabiliser is force-cooled by 4 low-noise fans with adaptive rotation speed.


Protection

Each IS5000RT stabiliser has a built-in comprehensive protection system with automatic recovery of operation.


Additional advantages of the IS5000RT include electronic and manual bypasses.


Monitoring facilities

The IS5000RT stabilizers have a built-in connector for installing one of the supported expansion boards, which provide the following interfaces:

RS-232;

USB or mini-USB;

dry contacts;

Ethernet (protocols: SNMP/Web /Modbus TCP).

Installing expansion boards allows configuration and local/remote monitoring of the stabilizer's status via the Web interface or Shtyl Device Manager – specially developed monitoring software.

The boards are not included in the basic package and are purchased as an optional extra.


General specifications
Input characteristics
Output characteristics
Control panel and interfaces
Connection
Reliability and performance characteristics

Write to us

We will reply to info@levrus.ru shortly