A ready-made solution for protection against unstable mains voltage in a 380 V network is a set of three single-phase IS8000RT stabilizers in a rack with a total consumed power of up to 24 kVA / 21.6 kW.
The stabilizer is manufactured in Russia and is perfectly adapted to the specifics of Russian power grids.
The quality of the device is confirmed by a Customs Union certificate of conformity (EAC). The manufacturer provides a 2-year warranty.
The device features a special stabilization principle – double power conversion, which ensures an instantaneous response (0 ms) to any deviations in mains parameters with maximum accuracy (±2 %) over a wide input voltage range (90-310 V). It also has an output voltage with a perfect sine wave and the ability to provide uninterrupted power supply to connected devices in the event of a possible power outage (up to 200 ms).
Installation and connection
The IS8000RT stabilizers are installed in a metal two-frame rack 12U high, designed for open and compact accommodation of 19-inch standard specialized equipment.
The devices can also be installed vertically on a flat horizontal surface using special supports. All fastening parts are included in the scope of delivery of the device.
Each stabilizer is connected to a separate supply phase (in the absence of three-phase electrical appliances), which increases the system's resilience to power supply faults: a failure of one of the phases will not affect the operation of the other two.
The IS8000RT models have a rotating control panel: when the position of the device is changed (from vertical to horizontal or vice versa), its position can also be changed for more convenient use.
Terminal blocks located on the rear panel are used for connection to the mains and for powering the load.
Indication
To monitor the operation and state of the power grid, the front panel of the stabilizer has "Normal" and "Fault" indicator LEDs.
The LCD display shows the main information about the input and output voltage values, the device load level and its internal temperature, the power consumption of connected devices, and alarm messages.
Cooling
Each stabilizer is force-cooled by 4 low-noise fans with adaptive rotation speed.
Protection
Each IS8000RT stabilizer has a built-in comprehensive protection system with automatic recovery.
Additional advantages of the IS8000RT are its electronic and manual bypasses.
Monitoring facilities
The IS8000RT stabilisers have a built-in connector for installing one of the supported expansion boards, which provide the following interfaces:
RS-232;
USB or mini-USB;
"dry" contacts;
Ethernet (protocols: SNMP/Web/Modbus TCP).
Installing expansion boards allows configuration and local/remote monitoring of the stabiliser's status via the Web interface or Shtyl Device Manager – purpose-developed monitoring software.
The boards are not included in the basic scope of supply and are purchased as an additional order.






