A ready-made solution for protection against unstable mains voltage in a 380 V network is a set of three single-phase IS10000RT stabilizers in a rack with a total power consumption of up to 30 kVA/ 27.
The stabilizer is manufactured in Russia and is well adapted to the specific operating conditions of Russian power grids.
The quality of the device's operation is confirmed by a Customs Union conformity certificate (EAC). The manufacturer provides a 2-year warranty.
The device is equipped with a special stabilization principle – double conversion of electricity, due to which an instantaneous response (0 ms) to any deviations in mains parameters is ensured with maximum accuracy (±2 %) over a wide input voltage range (90-310 V). It also has an output voltage with a perfect sine wave and the ability to provide uninterruptible power to connected devices during possible power outages (up to 200 ms).
Installation and connection
The IS10000RT stabilizers are installed in a metal dual-frame rack 12U high, intended for open and compact placement of 19-inch standard specialised equipment.
The devices can also be installed vertically on a flat horizontal surface using special stops. All mounting parts are included in the device's delivery package.
Each stabilizer is connected to a separate supply phase (in the absence of three-phase electrical appliances), which increases the system's resilience to power supply faults: failure of one phase will not affect the operation of the other two.
The IS10000RT models have a rotating control panel: when changing the device position (from vertical to horizontal or vice versa), its position can also be changed for more convenient use.
Terminal blocks located on the rear panel are used for connection to the mains and for powering the load.
Indication
To monitor operation and the power network status, "Normal" and "Fault" indicator LEDs are installed on the front panel of the stabilizer.
The LCD display shows the main information on input and output voltage values, the device load level and its internal temperature, the power consumption of connected devices, and alarm messages.
Cooling
Each stabilizer is force-cooled by 4 low-noise fans with adaptive rotation speed.
Protection
Each IS10000RT stabilizer has a built-in comprehensive protection system with automatic recovery.
The additional advantages of the IS10000RT include electronic and manual bypasses.
Monitoring tools
The IS10000RT stabilisers have a built-in connector for installing one of the supported expansion boards, which provide the following interfaces:
RS-232;
USB or mini-USB;
"dry" contacts;
Ethernet (protocols: SNMP/Web/Modbus TCP).
Installing expansion boards allows configuration and local/remote monitoring of the stabiliser's status via the Web interface or Shtyl Device Manager – specially developed monitoring software.
The boards are not included in the basic package and are ordered separately.






