‎+7 (499) 500-2460
Moscow, Udaltsova St., 81, bldg 2, office 6
Voltage stabilizers

Voltage stabilizer IS3108RT (8 kVA)

  • Brand: Shtil
  • Product Code: IS3108RT
  • Availability: In Stock
96 240 ₽

The IS3108RT inverter voltage stabiliser with three-phase input and single-phase output provides reliable protection against unstable voltage in a 380 V network for single-phase loads in domestic, commercial or industrial applications with a total capacity of up to 8 kVA/7.2 kW.

The stabiliser is manufactured in Russia and is ideally adapted to the specific operating conditions of Russian power grids.

The quality of the device's operation is confirmed by a Customs Union conformity certificate (EAC). The manufacturer provides a 2-year warranty.

The device is equipped with a special stabilisation principle – double energy conversion, which ensures an instantaneous response (0 ms) to any deviations in mains parameters with maximum accuracy (±2 %) over a wide input voltage range (90-310 V). It also has an output voltage with a perfect sine wave and the ability to provide uninterruptible power to connected devices in the event of a possible power outage (up to 200 ms).

Cooling

The stabiliser is cooled by two low-noise fans with an intelligent operating principle. Their noise level at a distance of 1 m from the device ranges from 40 dBA to 61 dBA.

Installation and connection

The stabiliser is installed using the mounting parts supplied in the kit - vertically on support feet or horizontally using brackets in the 19-inch rails of telecommunications cabinets.

Mounting fasteners for both installation options are included in the kit.

The IS3108RT model has a built-in control panel: when changing the position of the device (from vertical to horizontal or vice versa), its position can also be changed for more convenient use.

Terminal blocks located on the rear panel are used for connection to the mains and for powering the load.

Indication

For monitoring the operation and status of the power grid, signal LEDs "Mains", "Fault", "Bypass", "Output" are installed on the front panel of the stabiliser.

The LCD display shows basic information on the input and output voltage values, the device load level and its internal temperature, the power consumption of connected devices, and alarm messages.

Also, the following settings are available on the display: output voltage (in the range 220-240 V in 5 V steps), operating mode ("Stabilisation" or "ECO"), electronic bypass mode ("Auto", "Enable bypass", "Do not use"), start mode ("Auto start" or "By button"), upper and lower limits of the permissible voltage range in "ECO" mode and other parameters.

Protection

The IS3108RT voltage stabiliser incorporates a comprehensive protection system with automatic recovery.

Monitoring tools

The IS3108RT voltage stabiliser incorporates 2 slots for installing expansion boards, which provide the following interfaces:

RS-232 and RS-485;

USB or mini-USB;

“dry” contacts;

Ethernet.

Installing an expansion board enables configuration and local/remote monitoring of the stabiliser status via the Web interface or Shtyl Device Manager – specially designed monitoring software.

The boards are not included in the basic package and are purchased separately.


General specifications
Input characteristics
Output characteristics
Control panel and interfaces
Connection
Reliability and performance characteristics

Write to us

We will reply to info@levrus.ru shortly