‎+7 (499) 500-2460
Moscow, Udaltsova St., 81, bldg 2, office 6
Voltage stabilizers

Voltage stabiliser IS15000RT (15 kVA)

  • Brand: Shtil
  • Product Code: IS15000RT
  • Availability: In Stock
153 850 ₽

IS15000RT inverter-type voltage stabiliser, which provides high-quality power supply for a wide range of household, specialised and commercial electrical appliances in conditions of unstable mains voltage. The device is suitable for supplying loads with a total active power of up to 15 kVA / 13.5 kW.

The device is designed for operation in Russian power grids. The quality of its operation is confirmed by a Customs Union conformity certificate (EAC). The manufacturer provides a 2-year warranty for the device.

The device is equipped with a special stabilisation principle – double power conversion, which ensures an instantaneous response (0 ms) to any deviations in mains parameters with maximum accuracy (±2 %) over a wide input voltage range (90-310 V). It also has an output voltage with a perfect sine wave and the ability to provide uninterruptible power supply to connected devices in the event of a possible power outage (up to 200 ms).

Cooling

The stabiliser is cooled by an intelligent system with low-noise fans that have adaptive rotation speed.

Installation and connection

The stabiliser is installed using the mounting parts supplied – vertically on support feet or horizontally using brackets in 19-inch rack or cabinet rails.

The IS15000RT model has a built-in control panel: when the position of the device is changed (from vertical to horizontal or vice versa), its position can also be changed for more convenient use.

Terminal blocks located on the rear panel are used for connection to the mains and for powering the load.

Indication

To monitor operation and mains status, the front panel of the stabiliser has "Normal" and "Alarm" signal LEDs.

The LCD display shows basic information on input and output voltage values, the device load level and its internal temperature, the power consumption of connected devices, and alarm messages.

Protection

The IS15000RT stabiliser has a built-in comprehensive protection system with automatic recovery.

Additional advantages of the IS15000RT are the presence of electronic and manual bypasses.

Monitoring facilities

The IS15000RT stabiliser has a built-in slot for installing one of the supported expansion boards, which contain the following interfaces:

RS-232;

USB or mini-USB;

"dry" contacts;

Ethernet (protocols: SNMP/Web /Modbus TCP).

Installing the expansion board enables configuration and local/remote monitoring of the stabilizer status via the web interface or Shtyl Device Manager – specially developed monitoring software.

The boards are not included in the basic package and are purchased as an additional order.


General specifications
Input characteristics
Output characteristics
Control panel and interfaces
Connection
Reliability and performance characteristics

Write to us

We will reply to info@levrus.ru shortly