‎+7 (499) 500-2460
Moscow, Udaltsova St., 81, bldg 2, office 6
Voltage stabilizers

Voltage stabilizer IS1500RT (1500 VA)

  • Brand: Shtil
  • Product Code: IS1500RT
  • Availability: In Stock
23 270 ₽

The IS1500RT inverter-type voltage stabiliser is used to protect a wide range of household, specialist and commercial electrical appliances with a maximum total power of 1500 VA / 1125 W from poor-quality mains voltage.

The device is manufactured in Russia and is available in two versions, 220 V and 230 V. It is designed for operation in Russian power grids. Its performance quality is confirmed by a Customs Union certificate of conformity (EAC). The manufacturer provides a 2-year warranty on the device.

The unit is equipped with modern features and a special stabilisation principle – double power conversion, which ensures an instant response (0 ms) to any deviations in mains parameters with maximum accuracy (±2 %) over a wide input voltage range (90-310 V). It also has an output voltage with a perfect sine wave and the ability to provide uninterruptible power to connected devices in the event of a possible power outage (up to 200 ms).

The IS1500RT stabiliser is cooled by a low-noise fan whose rotation speed depends on the power of the connected load.

Installation and connection

The stabiliser is installed using the mounting parts supplied in the kit – vertically on support feet or, using brackets, in the 19-inch rails of racks or cabinets.

For connection to the mains, the device is fitted with a mains cable with a Euro plug. The load can be connected to the stabiliser via IEC-320-C13 "computer" sockets – 3 pcs, or a EURO F-type Euro socket – 1 pc.

Indication

To monitor operation and the state of the mains, "Normal" and "Fault" signal LEDs are fitted on the front panel of the stabiliser.

The LCD display shows the main information on the input and output voltage values, the device load level and its internal temperature, the power consumption of connected devices, and alarm messages.

Protection

Electronic protection is provided by a built-in electronic bypass (allows the load to continue to be powered directly from the mains in the event of an overload), input and output filters (protect the load from high-frequency interference in the 100 kHz - 30 MHz range), and a built-in varistor (2 kV, 1/50 µs), which provides protection against surge voltages.

Monitoring tools

The IS1000RT stabiliser has a slot for installing one of the supported expansion cards, which contain the following interfaces:

  • RS-232;
  • USB or mini-USB;
  • "dry" contacts;
  • Ethernet.

Installing the expansion card enables configuration and local/remote monitoring of the stabilizer's status via the web interface or Shtyl Device Manager – specially developed monitoring software.


General specifications
Main
Input characteristics
Output characteristics
Control panel and interfaces
Connection
Reliability and performance characteristics

Write to us

We will reply to info@levrus.ru shortly