The IS8000RT inverter-type voltage stabilizer provides high-quality power supply for a wide range of household, specialised and commercial electrical appliances under conditions of unstable mains voltage. The device is suitable for powering loads with a total active power of up to 8 kVA/7.2 kW.
The device is designed for operation in Russian electrical networks. The quality of its performance is confirmed by a Customs Union certificate of conformity (EAC). The manufacturer provides a 2-year warranty on the device.
The device is equipped with a special stabilisation principle – double conversion of electricity, which ensures an instant response (0 ms) to any deviations in mains parameters with maximum accuracy (±2 %) over a wide input voltage range (90-310 V). It also has an output voltage with a perfect sine wave and the ability to provide uninterruptible power to connected devices in the event of a possible power outage (up to 200 ms).
Cooling
The stabiliser is cooled by low-noise fans with an intelligent operating principle.
Installation and connection
The stabiliser is installed using the mounting parts supplied in the kit – vertically on support feet or horizontally using brackets in the 19-inch rails of racks or cabinets.
The IS8000RT model has a built-in control panel: when the device is repositioned (from vertical to horizontal or vice versa), the panel position can also be changed for more convenient use.
Terminal blocks located on the rear panel are used for connection to the mains and for powering the load.
Indication
To monitor operation and the mains status, "Normal" and "Fault" LED indicators are installed on the front panel of the stabiliser.
The LCD display shows key information about the input and output voltage values, the device load level and its internal temperature, the power consumption of connected devices, and alarm messages.
Protection
The IS8000RT stabiliser has a built-in comprehensive protection system with automatic recovery.
Additional advantages of the IS8000RT include electronic and manual bypasses.
Monitoring facilities
The IS8000RT stabilizer has a built-in slot for installing one of the supported expansion cards, which provide the following interfaces:
RS-232;
USB or mini-USB;
dry contacts;
Ethernet (protocols: SNMP/Web/Modbus TCP).
Installing the expansion board enables configuration and local/remote monitoring of the stabilizer status via the web interface or Shtyl Device Manager – specially developed monitoring software.
The boards are not included in the basic package and are purchased as an additional order.








