The single-phase inverter voltage stabiliser IS8000 is manufactured in Russia and is ideal for providing high-quality power supply and protection against surges and fluctuations in mains voltage for standalone equipment and groups of household or industrial electrical appliances with a total power consumption of up to 8 kVA/7.2 kW.
The device is adapted to the operating characteristics of Russian electrical networks. Its quality is confirmed by a Customs Union certificate of conformity (EAC).
The IS8000 stabiliser is a latest-generation device with improved performance and a distinctive stabilisation method - double power conversion - by means of which it continuously corrects the mains voltage over a wide range (90-310 V) and produces an output voltage with a precise sine wave (± 2 %), and also, in the event of a power failure, supplies the load uninterruptedly for 200 ms.
The IS8000 is equipped with a convection and fan cooling system. The fans switch on in sequence and only when the internal temperature of the device reaches a critical level.
Installation and connection
The stabiliser is installed indoors in residential and technical rooms and is attached to any flat vertical surface using self-tapping screws inserted into special holes on the rear of the enclosure.
Terminal blocks on the enclosure are used for connection to the mains and for supplying the load.
Indicators
The stabiliser's operation is monitored via LED indicators marked "Normal" and "Fault" and an LCD display showing input and output voltage values, load level scale, power, device temperature and alarm messages in the event of a device malfunction.
The output voltage can be changed on the display in the range 220-230 V in 1 V steps.
Protection
The device is equipped with modern electronic emergency protection with automatic recovery in the event of internal overheating, overload, short circuit, excessively low or high mains voltage (below 90 V or above 310 V) and internal faults of the device.
The stabiliser has a built-in automatic and manual bypass and a varistor (2 kV, 1/50 μs). Protection against high-frequency interference is provided by mains filters.











