The IS1000RT single-phase inverter-type voltage stabilizer is used to protect a wide range of household, specialised and commercial electrical appliances with a maximum total power of 1000 VA / 750 W from poor-quality mains voltage.
The device is manufactured in Russia and is available in two versions, 220 V and 230 V. It has been developed for operation in Russian power networks. The quality of its operation is confirmed by a Customs Union certificate of conformity (EAC). The manufacturer provides a 2-year warranty on the device.
The device is equipped with modern features and a special stabilisation principle – double power conversion, which ensures an instantaneous response (0 ms) to any deviations in mains parameters with maximum accuracy (±2 %) over a wide input voltage range (90-310 V). It also has an output voltage with a perfect sine wave and the ability to provide uninterruptible power to connected devices in the event of a possible power outage (up to 200 ms).
The stabilizer is cooled by a fan that automatically regulates its rotational speed.
Installation and connection
The stabilizer is installed using the mounting parts supplied – vertically on support feet or, using brackets, in 19-inch rack or cabinet rails.
For connection to the mains, the device is equipped with a mains cable with a Schuko plug. The load can be connected to the stabilizer via a Schuko socket or via C13 connectors (3 pcs.).
Indication
To monitor the operation and status of the mains, the front panel of the stabilizer has "Normal" and "Fault" indicator LEDs.
The LCD display shows the main information on the input and output voltage values, the device's load level and its internal temperature, the power consumption of connected devices, and alarm messages.
Protection
Electronic protection is provided by a built-in electronic bypass (allowing the load to continue to be powered directly from the mains in the event of an overload) and a built-in varistor (2 kV, 1/50 µs), which provides protection against surge overvoltages.
Monitoring facilities
The IS1000RT stabilizer has a connector for installing one of the supported expansion boards, which contain the following interfaces:
- RS-232;
- USB or mini-USB;
- "dry" contacts;
- Ethernet.
Installing the expansion board enables configuration and local/remote monitoring of the stabilizer's status via the Web interface or Shtyl Device Manager – specially developed monitoring software.







