‎+7 (499) 500-2460
Moscow, Udaltsova St., 81, bldg 2, office 6
Voltage stabilizers

Voltage stabilizer IS3106RT (6 kVA)

  • Brand: Shtil
  • Product Code: IS3106RT
  • Availability: In Stock
79 630 ₽

Inverter voltage stabiliser IS3106RT with three-phase input and single-phase output provides reliable protection against unstable voltage in a 380 V network for a single-phase load of domestic, commercial or industrial application with total power up to 6 kVA/5.4 kW.

IS3106RT allows a single-phase load to be connected to a three-phase network with even loading of all supply phases, thereby eliminating the possibility of network phase imbalance and removing the need for constant interphase balancing.

The device is equipped with a special stabilisation principle – double conversion of electricity, which ensures instantaneous response (0 ms) to any deviations in mains parameters with maximum accuracy (±2 %) over a wide input voltage range (90-310 V). It also has an output voltage with a pure sine wave and the ability to provide uninterruptible power to connected devices in the event of a possible power outage (up to 200 ms).

Cooling

Cooling is provided by two low-noise fans. Their noise level at a distance of 1 m from the device is from 40 dBA to 61 dBA (depending on operating speed).

Installation and connection

The stabiliser is installed using the mounting parts supplied – vertically on support feet or horizontally using brackets in the 19-inch rails of telecommunications cabinets.
Mounting fasteners for both installation options are included.

The IS3106RT model has a built-in control panel: when changing the position of the device (from vertical to horizontal or vice versa), its position can also be changed for more convenient use.

Terminal blocks located on the rear panel are used for connection to the mains and to power the load.

Indication

To monitor operation and mains status, the front panel of the stabiliser has "Mains", "Fault", "Bypass", "Output" indicator LEDs.

The LCD display shows basic information on input and output voltage, device load level and its internal temperature, power consumption of connected devices, and alarm messages.
The display also allows settings: output voltage (in the range 220-240 V in 5 V steps), operating mode («Stabilisation» or «ECO»), electronic bypass mode («Auto», «Enable bypass», «Do not use»), start mode («Auto start» or «By button»), upper and lower limits of the permissible voltage range in «ECO» mode, and other parameters.

Protection
The IS3106RT stabilizer has a built-in comprehensive protection system with automatic recovery of operation.

Monitoring tools

The IS3106RT stabilizer has 2 built-in connectors for installing expansion boards, which contain the following interfaces:

RS-232;

USB or mini-USB;

dry contacts;

Ethernet (protocols: SNMP/Web /Modbus TCP).

Installing an expansion board allows configuration and local/remote monitoring of the stabilizer status via the Web interface or Shtyl Device Manager – specially developed monitoring software.

The boards are not included in the basic package and are purchased separately.


General specifications
Input characteristics
Output characteristics
Control panel and interfaces
Connection
Reliability and performance characteristics

Write to us

We will reply to info@levrus.ru shortly