The IS3320RT inverter voltage stabilizer provides reliable protection against unstable mains voltage for three-phase and single-phase consumers with a total capacity of up to 20 kVA/16 kW.
The stabilizer is manufactured in Russia and is perfectly adapted to the specific operating conditions of Russian power grids.
The quality of the device's performance is confirmed by a Customs Union certificate of conformity (EAC). The manufacturer provides a 2-year warranty.
The device is equipped with a special stabilisation principle – double power conversion, which ensures an instantaneous response (0 ms) to any deviations in mains parameters with maximum accuracy (±2 %) over a wide input voltage range (155-537 V). It also has an output voltage with a perfect sine wave and the ability to provide uninterruptible power to connected devices in the event of a possible power outage (up to 200 ms).
Cooling
The stabilizer is cooled by low-noise fans with an intelligent operating principle. Their noise level at a distance of 1 m from the device ranges from 42 dBA to 64 dBA.
Installation and connection
The stabilizer is installed using the mounting parts supplied in the kit – vertically on support feet or horizontally using brackets in the 19-inch rails of telecommunications cabinets.
Mounting hardware for both installation options is included in the kit.
The IS3320RT model has a built-in control panel: when the position of the device changes (from vertical to horizontal or vice versa), its position can also be changed for more convenient use.
Terminal blocks located on the rear panel are used for connection to the mains and for powering the load.
Indication
To monitor the operation and status of the power grid, the front panel of the stabilizer is fitted with "Mains", "Fault", "Bypass" and "Output" indicator LEDs.
The LCD display shows the basic information about the input and output voltage values, the device's load level and its internal temperature, the power consumption of connected devices, and alarm messages.
The display also allows settings: output voltage (in the range of 220-240 V in 5 V steps), operating mode ("Stabilisation" or "ECO"), electronic bypass mode ("Auto", "Enable bypass", "Do not use"), start mode ("Autostart" or "By button"), the upper and lower limits of the permissible voltage range in "ECO" mode and other parameters.
Protection
The IS3320RT stabilizer has a built-in comprehensive protection system with automatic recovery of operation.
Monitoring facilities
The IS3320RT stabiliser has 2 built-in slots for expansion boards, which provide the following interfaces:
RS-232 and RS-485;
USB or mini-USB;
dry contacts;
Ethernet.
Fitting an expansion board enables configuration and local/remote monitoring of the stabiliser's status via the web interface or Shtyl Device Manager – purpose-developed monitoring software.
The boards are not included in the basic package and are purchased separately.










