Inverter voltage stabilizer IS3315RT with three-phase input and single-phase output - will provide reliable protection against unstable voltage in a 380V network for single-phase loads of domestic, commercial or industrial application with a total capacity of 15 kVA/13.5 kW. IS3315RT enables connection of a single-phase load to a three-phase network with uniform loading, and eliminates the possibility of mains phase imbalance, as well as removing the need for constant inter-phase balancing.
The stabilizer is manufactured in Russia and is excellently adapted to the specifics of operation of Russian electrical networks.
The quality of the device's operation is confirmed by a Customs Union conformity certificate (EAC).The manufacturer provides a 2-year warranty.
The device is equipped with a special stabilisation principle – double conversion of electricity, which ensures an instantaneous response (0 ms) to any deviations in mains parameters with maximum accuracy (±2 %) over a wide input voltage range (155-537 V). It also has an output voltage with a pure sine wave and the ability to provide uninterruptible power to connected devices in the event of a possible power outage (up to 200 ms).
CoolingCooling of the device is performed by four low-noise fans with adaptive speed.
The LCD display shows basic information on the input and output voltage values, the device load level and its internal temperature, the power consumption of connected devices, and alarm messages.
The display also allows settings: output voltage (in the range 220–240 V in 5 V steps), operating mode (“Stabilisation” or “ECO”), electronic bypass mode (“Auto”, “Enable bypass”, “Do not use”), start mode (“Auto-start” or “Button”), the upper and lower limits of the permissible voltage range in “ECO” mode, and other parameters.
Protection: The IS3315RT stabiliser has a built-in comprehensive protection system with automatic recovery.
Monitoring facilitiesThe IS3315RT stabilizer has 2 built-in connectors for installing expansion boards, which provide the following interfaces:
RS-232 and RS-485;
USB or mini-USB;
"dry" contacts;Ethernet.
Installing an expansion board enables configuration and local/remote monitoring of the stabilizer status via the web interface or Shtyl Device Manager – specially developed monitoring software.
The boards are not included in the basic package and are purchased separately.










