Inverter voltage stabiliser IS3306RT with three-phase input and single-phase output - will provide reliable protection against unstable voltage in a 380V network for single-phase loads in domestic, commercial or industrial applications with a total capacity of up to 6 kVA/5.4 kW.
The stabiliser is manufactured in Russia and is perfectly adapted to the specifics of Russian power grids.
The quality of the device is confirmed by a Customs Union conformity certificate (EAC). The manufacturer provides a 2-year warranty.
The device is equipped with a special stabilisation principle – double power conversion, which ensures an instantaneous response (0 ms) to any deviations in mains parameters with maximum accuracy (±2 %) across a wide input voltage range (90-310 V).It also has an output voltage with a perfect sine wave and the ability to provide uninterruptible power to connected devices in the event of a possible power outage (up to 200 ms).
CoolingCooling is provided by two low-noise fans. Their noise level at a distance of 1 m from the device is from 40 dBA to 61 dBA (depending on the operating speed).
Installation and connectionThe stabiliser is installed using the mounting parts supplied - vertically on support feet or horizontally using brackets in the 19-inch rails of telecommunications cabinets.
Mounting fixings for both installation options are included.
The LCD display shows the main information on the input and output voltage values, the device load level and its internal temperature, the power consumption of connected devices, and alarm messages.
The display also allows settings: output voltage (in the range 220-240 V in 5 V steps), operating mode ("Stabilisation" or "ECO"), electronic bypass mode ("Auto", "Enable bypass", "Do not use"), start mode ("Auto start" or "By button"), the upper and lower limits of the permissible voltage range in "ECO" mode and other parameters.
Protection The IS3306RT stabilizer incorporates a comprehensive protection system with automatic recovery of operation.







