LEVRUS LLC will supply CAT 773E dump trucks for a mining and processing plant (GOK). The model combines higher power, efficiency and well-planned maintenance.
Advantages of CAT 773E over analogues
- up to 7% more power;
- increased power transferred to the ground thanks to greater torque and higher speed when travelling on slopes;
- maximum efficiency;
- higher efficiency thanks to advanced design methods and software;
- improved safety;
- centralised engine and machine controls located at ground level provide safe and easy daily maintenance.
CATERPILLAR 773E specifications
| ENGINE | |
| Engine model | Cat 3412E |
| Rated engine speed | 2000 RPM |
| Gross power according to SAE J1995 | 530 kW |
| Net power according to SAE J1349 | 501 kW |
| Useful power — according to the Cat standard | 501 kW |
| Flywheel power | 501 kW |
| Net power in accordance with ISO 9249 | 501 kW |
| Useful power — 80/1269/EEC | 501 kW |
| Useful power — according to DIN 70020 | 681 PS |
| Number of cylinders | 12 |
| Torque reserve | 40% |
| Cylinder bore | 137 mm |
| Piston stroke | 152 mm |
| Engine displacement | 27 l |
| Maximum torque value | 3434 N·m |
| MASS — APPROXIMATELY | |
| Design gross operating weight of the machine | 99300 kg |
| Chassis weight | 30200 kg |
| Body weight | 9210 kg |
| OPERATING CHARACTERISTICS | |
| Rated load capacity class (100%) | 55.5 t |
| Maximum speed with load | 62.2 km/h |
| Body capacity — geometric | 26.6 m³ |
| Body capacity — SAE 2:1 | 35.2 m³ |
| Rise time | 9.5 Seconds |
| Lowering time | 12.5 Seconds |
| GEARBOX | |
| 1st forward gear | 9.9 km/h |
| 2nd forward gear | 13.9 km/h |
| 3rd forward gear | 18.8 km/h |
| 4th forward gear | 25.2 km/h |
| 5th forward gear | 34.1 km/h |
| 6th forward gear | 45.9 km/h |
| 7th forward gear | 62.2 km/h |
| Reverse | 13.1 km/h |
| ON-BOARD GEARBOXES | |
| Final drive ratio | 3,64:1 |
| Gear ratio of the planetary stage | 4,8:1 |
| Overall gear ratio | 17,48:1 |
| BRAKES | |
| Brake surface area — front brakes | 1,395 cm² |
| Brake surface area — rear brakes | 61269 cm² |
| Standard braking system parameters | ISO 3450:1996 |
| BODY LIFTING MECHANISMS | |
| Pump delivery — high idle speed | 491 l/min |
| Safety valve opening pressure — lift | 17225 kPa |
| Safety valve opening pressure - lowering | 3445 kPa |
| Body lifting time — high idle speed | 9.5 Seconds |
| Body lowering time — floating mode | 12.5 Seconds |
| Forced body lowering — high idle speed | 17.51 Seconds |
| CAPACITY OF THE TWO-SLOPE BODY AT 100% FILL FACTOR | |
| Geometric | 26.6 m³ |
| Capacity with "cap" 2:1 (SAE) | 35.2 m³ |
| Capacity with "cap" 3:1 | 32.4 m³ |
| Capacity with "cap" 1:1 | 43.3 m³ |
| SUSPENSION | |
| Cylinder piston power stroke — front suspension | 234 mm |
| Working stroke of the cylinder piston — rear suspension | 149 mm |
| Rear axle oscillation | 8.1 degrees |
| REFUELLING TANK CAPACITY | |
| Fuel tank | 700 litres |
| Cooling system | 122 l |
| Differentials and final drives | 155 l |
| Power steering system reservoir | 34 l |
| Steering system (including reservoir) | 60 l |
| Hydraulic tank for torque converter/brake system/body lift | 133 litres |
| Body lifting system/brake system (including reservoir) | 307 l |
| Torque converter/gearbox (including oil sump) | 72 l |
| Torque converter and gearbox | 53 l |
| Engine crankcase | 68 l |
| BUSBARS | |
| Standard busbars | 24.00-R35 (E4) |
| ROPS CONSTRUCTION | |
| ROPS/FOPS standards | Complies with SAE J1040 standards of May 1994 and ISO 3471:1997 |
| SOUNDPROOF | |
| Standards regulating noise levels | Complies with SAE J88 standard of April 1995 |
| DIMENSIONS | |
| Height — to the top of the ROPS structure | 4000 mm |
| Overall body length | 8535 mm |
| Length of the internal part of the body | 6400 mm |
| Overall length | 9120 mm |
| Wheelbase | 4191 mm |
| Distance from the rear axle to the rear edge of the body | 2782 mm |
| Ground clearance | 591 mm |
| Unloading clearance | 676 mm |
| Loading height — without load | 3773 mm |
| Maximum internal depth of the body | 1805 mm |
| Overall height with the body raised | 8787 mm |
| Operating width | 5076 mm |
| Width across the centre lines of the front wheels | 3275 mm |
| Distance to the engine guard panel | 667 mm |
| Overall width with canopy | 4398 mm |
| External body width | 3910 mm |
| Internal body width | 3658 mm |
| Height to the front visor | 4424 mm |
| Ground clearance under the rear axle | 591 mm |
| Track between the centre lines of the rear pairs of wheels | 2927 mm |
| Overall tyre width | 4457 mm |
| APPROXIMATE MASS VALUES — DOUBLE-SLOPE BODY | |
| Chassis | 30,200 kg |
| Body | 9210 kg |
| Standard lining | 3900 kg |
| Rear axle — without load | 52.7 % |
| Rear axle — with load | 66.7 % |


