LEVRUS LLC has supplied a Racor 75900MAX dual switchable fuel filter-water separator from Parker for a Caterpillar C18 marine diesel genset. The equipment belongs to the Turbine Series 75900/1000MAX/M/P and is rated for a fuel flow rate of 681 l/h.
75900MAX Turbine filter assemblies are designed for installation on the vacuum side of the fuel pump. They provide maximum efficiency and protect precision engine components from dirt, rust, algae, asphaltenes, varnish and especially water. Contaminants are removed from the fuel during a three-stage process.
Three-stage fuel cleaning
First stage — separation. Fuel enters the filter assembly, moves through the centrifuge and spins out large solid particles and water droplets, which fall to the bottom of the collection bowl.
Second stage — coalescing. Fine water droplets merge on the surface of the conical deflector and the cartridge element. When they become heavy enough, they also fall to the bottom of the bowl.
Third stage — filtration. Patented Aquabloc® II elements repel water and remove contaminants from fuel down to 2 micron (nominal). They are waterproof and remain effective longer than water-absorbing elements.
Turbine series filters are available in sizes to suit any application, are easy to service, are rated for a maximum pressure of 25 psi and have a self-contained water drain. FG and FH models offer a transparent bowl with a sight glass. MA models are approved for hire and commercial boat use and use a metal bowl.
Replacement filter elements for Marine 75900MAX
- 2040SMOR — 2 micron;
- 2040TMOR — 10 micron;
- 2040PMOR — 30 micron.


