The ST33015S UPS is used to ensure uninterrupted operation and protection against voltage fluctuations of critical three-phase and single-phase equipment with a total capacity of up to 15 kVA /13.5 kW, for example:
- telecommunications equipment and communication systems;
- IT equipment;
- of Hi-Tech audio equipment;
- television equipment;
- retail and entertainment equipment.
The ability to connect up to 6 ST33015S UPS units in parallel allows the output power of the uninterruptible power supply system to be increased in stages, as the number of consumers grows, up to 90 kVA, and makes it easier on the budget at the initial purchase stage.
ST33015S is an online UPS with double energy conversion, thanks to which the device provides:
- operation over a wide mains voltage range (228-478 V) without switching to battery power;
- instant and seamless transfer of the load power to the battery when the mains voltage fails;
- continuous supply of the load with sinusoidal voltage of high accuracy (±1.5%);
- maximum protection of the load from adverse effects of the mains;
- full independence of the output voltage characteristics from the mains condition.
Installation and connection
ST33015S is intended for floor placement or installation on any flat horizontal surface. The load and power supply are connected via terminal blocks located on the rear side of the UPS cabinet.
Battery operation
Battery operation is provided by the built-in 9 Ah batteries and a charger. At 100% load, the battery runtime will be up to 7 minutes.
Control panel
Configuration and monitoring of the main operating parameters of the product are performed using the control panel. It includes an LCD display, a current path mimic diagram, LED indicators and control buttons.
The device's LCD display shows the input and output voltage, its frequency, the apparent, active and reactive load power, UPS load percentage of its rated power, remaining battery runtime, the alarm log and other device parameters.
The LED indicators signal the status of the UPS itself and of its individual units: rectifier, batteries, bypass circuit, inverter, output.
Protection
ST33015S has a multi-level protection system against:
- overload and short circuit;
- internal overheating;
- high-frequency mains interference and impulse overvoltages;
- switching transients and non-linear distortion;
- "deep" battery discharge.
The automatic bypass performs an uninterrupted transfer of load power to the mains when the device fails or is overloaded. The manual service bypass allows UPS servicing without interrupting the load power.
Monitoring tools
The UPS offers the ability to organise local/remote monitoring and control. For this, there are USB, RS-232, RS-485 ports (Modbus RTU and Modbus ASCII protocols) and dry contacts.
An Ethernet expansion card (SNMP/HTTP/HTTPS/SSH/Megatec protocols) can also be connected to the UPS. This card is not included in the standard package and must be purchased separately.
The UPS operation is tracked directly in a web browser, as well as in the Shut Down Manager or Shtyl Device Manager (SDM) software.
- Advantages







