The SM300 UPS (10x30) provides uninterruptible power supply and protects three-phase electrical equipment from unstable voltage in the 380 V network, for example:
- telecommunications and server equipment;
- IT and computer equipment;
- Hi-Tech audio and video equipment;
- electrical equipment for the retail and entertainment sector;
- high-power household electrical equipment.
The SM300 (10x30) is a robust metal cabinet housing ten 30 kVA / 27 kW power modules and other components. The cabinet door has a dust filter.
The device supports parallel operation of up to 3 SM300 UPSs, enabling an output power of up to 900 kVA / 810 kW.
The SM300 (10x30) also supports module- or UPS-unit-based redundancy technologies for building high-reliability configurations.
The SM300 (10x30) uses double conversion technology in operation, which provides:
- operation over a wide mains voltage range (228-478 V) without switching to battery power;
- instant and seamless transfer of the load power to the battery when the mains voltage fails and back when it is restored;
- continuous supply of the load with sinusoidal voltage of high accuracy (±2%);
- maximum protection of the load from adverse effects of the mains;
- full independence of the output voltage characteristics from the mains condition.
Hot-swap replacement of a failed power module is provided (without de-energising the UPS and the load). In this case, the load power will be distributed evenly among the operating redundant modules, if they were installed.
Connection
The input mains and electrical appliances are connected via busbars.
Battery operation
Model SM300 (10x30) has no built-in batteries. The UPS provides long-term autonomous operation of the load by connecting external batteries. For correct selection of external batteries and solutions for their installation, please contact the specialists of the SHTYL Group plant.
The UPS has a built-in charger whose current is set in the range from 1 to 20% of the UPS power.
Control panel
A modern control panel is fitted on the UPS door, comprising an LCD display and LED indicators. They allow convenient monitoring of the device's operation and basic settings to be made.
The LCD display shows the input and output voltage, input frequency, apparent and active load power, UPS load percentage of its rated power, the alarm log and other device parameters.
The LED indicators signal the status of the UPS itself and of its individual units: rectifier, batteries, bypass circuit, inverter and output.
The power module installed inside the UPS has its own LCD display, which shows its operating parameters and allows its status to be monitored.
Protection
The SM300 (10x30) has a multi-level protection system:
- overload and short circuit;
- internal overheating;
- high-frequency mains interference and impulse overvoltages;
- switching transients and non-linear distortion;
- "deep" battery discharge.
The centralised electronic bypass is used to switch the load supply to the input mains without interrupting its power supply in the event of an overload or UPS failure.
The manual maintenance bypass is used for servicing the UPS without interrupting the power supply to connected electrical appliances.
Monitoring tools
The SM300 (10x30) offers functionality for local/remote monitoring and control.
For this purpose, dry contacts, USB and RS-232 ports, as well as an Ethernet interface supporting SNMP, SHTYL and other protocols are used.
The UPS operation is monitored using the Shut Down Manager or Shtyl Device Manager software.
The device is equipped with an EPO port for remote emergency shutdown.
- Advantages





