The SM120 (5x20) modular online UPS is used to ensure uninterrupted operation and protection against unstable voltage in the 380 V mains for three-phase loads, for example:
- telecommunications and server equipment;
- IT and computer equipment;
- Hi-Tech audio and video equipment;
- electrical equipment for the retail and entertainment sector;
- high-power household appliances.
The SM120 (5x20) is a robust metal cabinet housing five 20 kVA /18 kW power modules and other components. The cabinet door has a dust filter.
Connecting additional power modules allows the output power of the power system to be increased to 120 VA /108 kW, and parallel connection of up to 3 SM120 UPS units fully equipped with modules – to 360 kVA/ 324 kW.
The SM120 (5x20) also supports redundancy technologies based on UPS modules or units to build highly reliable configurations.
The SM120 (5x20) is an online UPS featuring double-conversion technology, which provides:
- operation over a wide mains voltage range (228-478 V) without switching to battery power;
- instant and seamless transfer of the load power to the battery when the mains voltage fails and back when it is restored;
- continuous supply of the load with sinusoidal voltage of high accuracy (±1.5%);
- maximum protection of the load from adverse effects of the mains;
- full independence of the output voltage characteristics from the mains condition.
Hot-swap replacement of a failed power module is provided (without de-energising the UPS and the load). In this case, the load power will be distributed evenly among the operating redundant modules, if they were installed.
Connection
The load and input mains are connected via busbars.
Battery operation
Model SM120 (5x20) without built-in batteries. The device can provide long-term autonomous operation of the load by connecting external batteries. For correct selection of external batteries and solutions for their installation, please contact the specialists of the SHTYL Group plant.
The UPS has a built-in charger whose current is set in the range from 1 to 20% of the UPS power.
Control panel
A modern control panel is fitted on the UPS door, comprising an LCD display and LED indicators. They allow convenient monitoring of the device's operation and basic settings to be made.
The LCD display shows the input and output voltage, input frequency, apparent and active load power, UPS load percentage of its rated power, the alarm log and other device parameters.
The LED indicators signal the status of the UPS itself and of its individual units: rectifier, batteries, bypass circuit, inverter and output.
The power module installed inside the UPS has its own LCD display, which shows its operating parameters and allows its status to be monitored.
Protection
The SM120 (5x20) is equipped with a highly efficient protection system against:
- overload and short circuit;
- internal overheating;
- high-frequency mains interference and impulse overvoltages;
- switching transients and non-linear distortion;
- "deep" battery discharge.
In addition, the device has:
- centralised electronic bypass, for switching the load power to the mains without interrupting the power supply to the critical load in the event of overload or UPS failure;
- manual maintenance bypass designed for servicing the device without interrupting the load power.
Monitoring tools
The SM120 (5x20) offers local/remote monitoring and control.
For this purpose, dry contacts, USB and RS-232 ports, as well as an Ethernet interface supporting SNMP, SHTYL and other protocols are used.
The UPS is monitored using Shut Down Manager or Shtyl Device Manager software.
The model is also equipped with an EPO port for remote emergency shutdown.
- Advantages





