The SM060/10 (4x10) modular online UPS is a professional system for ensuring high-quality power supply and uninterrupted operation of critical three-phase equipment, for example:
- computer rooms, server rooms or the entire IT infrastructure of companies;
- security systems;
- radio and television broadcasting facilities;
- telecommunications equipment;
- industrial and oil and gas equipment.
SM060/10 (4x10) is a robust metal cabinet housing four 10 kVA /9 kW modules and other device components. The cabinet door has a dust filter.
Connecting additional power modules allows the output power of the power system to be increased to 60 kVA /54 kW, and parallel connection of up to 3 SM060/10 UPS units fully equipped with modules – to 180 kVA / 162 kW.
SM060/10 (4x10) also supports the use of redundancy technologies based on UPS modules or units to build highly reliable configurations.
SM060/10 (4x10) is an online UPS with a high-tech component base, operating on the basis of double conversion technology, which provides:
- operation over a wide mains voltage range (228-478 V) without switching to battery power;
- instant and seamless transfer of the load power to the battery when the mains voltage fails and back when it is restored;
- continuous supply of the load with sinusoidal voltage of high accuracy (±1.5%);
- maximum protection of the load from adverse effects of the mains;
- full independence of the output voltage characteristics from the mains condition.
Hot-swap replacement of a failed power module is provided (without de-energising the UPS and the load). In this case, the load power will be distributed evenly among the operating redundant modules, if they were installed.
Connection
The load and the device's power supply are connected via busbars.
Battery operation
The SM060/10 UPS (4x10) does not have built-in batteries, but is capable of providing long-term autonomous operation of the load by connecting external batteries. For the correct selection of external batteries and solutions for their installation, please contact the specialists of the SHTYL Group plant.
The model is also equipped with a built-in charger; its current is set in the range from 1 to 20% of the UPS power.
Control panel
A modern control panel is fitted on the UPS door, comprising an LCD display and LED indicators. They allow convenient monitoring of the device's operation and basic settings to be made.
The LCD display shows the input and output voltage, input frequency, apparent and active load power, UPS load percentage of its rated power, the alarm log and other device parameters.
The LED indicators signal the status of the UPS itself and of its individual units: rectifier, batteries, bypass circuit, inverter and output.
The power module installed inside the UPS has its own LCD display, which shows its operating parameters and allows its status to be monitored.
Protection
The SM060/10 (4x10) UPS uses a multi-level protection system against:
- overload and short circuit;
- internal overheating;
- high-frequency mains interference and impulse overvoltages;
- switching transients and non-linear distortion;
- "deep" battery discharge.
The centralised electronic bypass allows automatic, uninterrupted switching of the load supply to the mains in the event of an overload or device failure.
The technical bypass enables manual transfer of the load supply to the mains when repair or servicing of the UPS is required without interrupting the operation of the connected equipment.
Monitoring tools
The SM060/10 (4x10) UPS provides local/remote operation monitoring.
For this purpose, dry contacts, USB and RS-232 ports, as well as an Ethernet interface supporting SNMP, SHTYL and other protocols are used.
Device operation is tracked in Shut Down Manager or Shtyl Device Manager software.
The UPS is also equipped with an EPO port for remote emergency shutdown.
- Advantages





