The SR3110L online UPS with three-phase input and single-phase output is designed to provide uninterruptible power supply and protection against voltage fluctuations in a 380 V network for critical single-phase appliances with a total capacity of up to 10 kVA /8 kW, for example:
- server rooms, computer rooms and data centres;
- IT infrastructure of small and medium-sized businesses;
- network and telecommunications equipment;
- security, intruder and alarm systems;
- process control system equipment.
Thanks to the 3-in-1 configuration, the UPS allows a single-phase load to be connected to a three-phase mains with even loading of all supply phases (the power of the connected devices may exceed the power of an individual phase), which eliminates the possibility of mains imbalance and removes the need for constant phase-to-phase balancing.
The SR3110L is a UPS with high-frequency double conversion of energy, thanks to which the device allows:
- stabilise the input voltage over a wide range (phase voltage – 90-295 V) without switching to autonomous mode;
- instantly and seamlessly switch the load power to the battery when the mains voltage fails;
- supply the load with a perfect sinusoidal voltage with high stabilisation accuracy (±2%).
Thanks to the improved power factor corrector operating algorithm, the SR3110L model functions excellently in conjunction with diesel generator sets.
Installation and connection
The UPS has a rack-mount design, which allows the device to be placed in 19-inch rails of telecommunications cabinets and racks.
The terminal blocks on the rear panel of the enclosure provide convenient connection of the load and the input mains.
Battery operation
For autonomous operation of the load, the UPS has a built-in charger (current from 1 to 4, setting step 0.5 A) and a connector for connecting external batteries. The maximum capacity of external batteries is 100 Ah (without an external charger) and 360 Ah (with an external charger), which provides autonomous operation for 50 min or 5 h respectively (at 100% load) (Battery Runtime Table).
Batteries are installed in dedicated battery modules or telecommunications cabinets.
The SR3110L uses modern technologies to reduce charging time and extend battery service life (intelligent charging and battery charge temperature compensation).
In addition, the model features special algorithms that allow:
- disconnect the battery at 80-85% discharge (protection against deep discharge);
- notify the user in advance of battery wear;
- accurately predict the autonomy time at the current load.
Control panel
The main operating parameters of the UPS are monitored and configured using the control panel. It includes an LCD display, four function keys and five LED indicators:
- "Fault" – a fault has occurred in the device operation;
- "Mains" – input mains normal, UPS in normal (online) operation;
- "Bypass" – a switch to bypass has been performed;
- "Output" – voltage is supplied to the load;
- "Battery" – battery status.
Information on the LCD display:
- input and output voltage values;
- UPS load percentage;
- input mains and output frequency;
- battery voltage values;
- active and apparent load power;
- output status;
- alarms with indication of causes.
The control panel allows three battery tests to be performed:
- 10-second (the UPS supplies the load from the battery for 10 seconds);
- for a specified time (the UPS powers the load from the battery for a specified time);
- to full discharge (the UPS powers the load from the battery until it is fully discharged, measuring the residual capacity).
Tests are started via the System menu, UPS Command item.
Protection
Model SR3110L features electronic protection against:
- short circuit;
- output overload;
- internal overheating.
Once the cause of the protection tripping is eliminated, the device automatically restarts.
In addition, the UPS is equipped with protection against high-frequency mains interference and surge voltages, as well as emergency protection against operational faults (when activated, the load is disconnected or transferred to the mains via bypass without interruption).
Using a separate input for the automatic electronic bypass prevents load imbalance on one of the supply phases when operating in bypass mode.
Monitoring tools
Model SR3110L supports local/remote operation monitoring. On the rear panel of the device there are two slots for installing expansion boards with the following interfaces:
- RS-232 (Megatec protocol);
- RS-485 (Modbus RTU/SHTYL protocols);
- USB and mini-USB;
- Ethernet (protocols Web/SNMP/NTP/Modbus TCP/SHTYL);
- "dry" contacts.
UPS operation with an installed card can be monitored in a web browser or via the dedicated Shtyl Device Manager software.
Please note that expansion boards are not included in the standard scope of supply and must be purchased separately.
Excellent price/quality ratio compared with similar products from foreign vendors on the Russian power supply systems market.
- Advantages







