‎+7 (499) 500-24-60
Moscow, Udaltsova St., 81, bldg 2, office 6
Single-phase UPS

SHTYL Garantir-1103R3 online UPS (1500 VA / 1200 W)

  • Brand: Shtil
  • Product Code: Garantir-1103R3
  • Availability: Pre-order
203 596 ₽

The single-phase redundant SHTYL Guarantir-1103R3 UPS is a modular rack-mount uninterruptible power supply system with an output power of 1500 VA / 1200 W. The device architecture is built on TIR8/12 rectifier-inverter modules with N+1 hot redundancy.

The UPS is designed to protect server, telecommunications, industrial and engineering equipment from any mains problems, providing stable, high-quality power around the clock.

Scope of delivery

The Garantir-1103R3 UPS includes one rectifier-inverter module TIR8/12.

The SHTYL Garantir-1103R3 UPS is built using double-conversion technology (online). This operating principle provides:

  • correct operation under input voltage fluctuations in the range 110-290 V without using batteries;
  • automatic transfer to battery power without a pause or interruption of the power supply when the mains fails;
  • supplying the load with stable voltage with a pure sine wave and stabilisation accuracy up to ±1.5%.

Redundancy

Connecting the optional TIR8/12 module to the UPS (not included in the basic scope of supply and purchased separately) allows:

  • create an N+1 redundancy scheme in which an additional power module operates continuously alongside the main module and is ready to instantly take over the load if it fails (hot redundancy). Switching occurs automatically and without interruption of power to the consumers.
  • increase power to 3000 VA / 2400 W when both modules operate simultaneously.

"Hot" redundancy of the power modules ensures uninterrupted operation of the UPS if one rectifier-inverter module fails. This advantage makes the Garantir-1103R3 indispensable for powering mission-critical equipment used at remote, low-maintenance or rarely serviced facilities, as well as at restricted-access facilities. The function improves the UPS fault tolerance.

"Hot" connection of an additional power module increases the UPS power during operation without disconnecting the load and the mains. When configuring the UPS, subsequent increases in load power and/or subsequent increases in autonomous operation time (expansion of the connected battery capacity) can be taken into account immediately.

Installation and connection

The Garantir-1103R3 UPS is designed for installation in a 19-inch rack or telecommunications cabinet. The device is attached to 19-inch rails and placed on a shelf or support angles (horizontal support brackets).

The device is connected to the mains via an IEC-C20 connector. IEC-C13 connectors (6 pcs) and an IEC-C19 socket are provided for the load.

Battery operation

The Garantir-1103R3 UPS has 20 built-in batteries with a total capacity of 45 Ah. At 80% load, the device will keep connected equipment running for 30 minutes. The battery array is charged at 48 V and a current of up to 25 A.

Additional options

The following can additionally be connected to the Garantir-1103R3 UPS:

  • SHTYL battery supervisor, ver.2;
  • SHTYL network supervisor, ver.2.

Control

The PSC-300.03.02 controller within the Garantir-1103R3 performs centralised control, monitoring and supervision of the entire uninterruptible power supply system. It coordinates the operation of the TIR8/12 rectifier-inverter modules, monitors the condition of the batteries and tracks power supply parameters in real time.

Main tasks of the controller:

  • control of the operation of power modules;
  • input and output voltage monitoring;
  • load current monitoring;
  • battery charge management;
  • logging of alarms and warnings;
  • display of the system status on the display;
  • remote monitoring via Ethernet and Mini-USB;
  • event logging;
  • configuration of UPS parameters and the redundancy system.

The Garantir-1103R3 UPS offers an excellent price/quality ratio compared with similar products from foreign vendors on the Russian power supply systems market.

  • Specifications

General specifications
Apparent power, kVA 1,5
Active power, kW 1,2
Form factor rack-mount
Number of phases 1 to 1
Operating modes online, autonomous, bypass
Topology online (double conversion)
Country of manufacture Russia
Input characteristics
Input mains type single-phase three-wire (L, N, PE)
Limiting input voltage range, V 110-290
Operating input voltage range, V 185-275 at 100% load, 110-290 at 50% load
Rated input frequency, Hz 50
Rated input voltage, V 230
Soft start yes
Permissible input frequency range, Hz 47,5-52,5
Output characteristics
Crest factor 3:1
Maximum output current, A 6,5
Output power factor 0,8
Output voltage type single-phase
Rated output frequency, Hz 50
Stabilisation accuracy, % 1,5
Transfer time to battery mode from on-line mode, ms 0
Overload capacity 133% for 15 s (followed by shutdown)
Output voltage total harmonic distortion, % 1.5 (with linear load), 3 (with non-linear load)
Rated AC output voltage, V 230
Output voltage waveform sine wave
Efficiency in online mode, % 96
Efficiency in battery mode, % 87
Protection
Manual bypass yes
Control panel and interfaces
Ethernet yes
RS-485 yes
Indication type LCD display
EPO yes
"Dry" contacts yes
mini-USB yes
Connection
Input mains IEC-C20
Load (output sockets) IEC-C13 (6 pcs.), IEC-C19 (1 pc.)
Reliability and performance characteristics
Cooling type forced air cooling (fan)
Mechanical characteristics
Weight, kg 87
Rack mounting height, U 6
Overall dimensions HxWxD (unpacked), mm 266x483x555
Batteries (battery packs)
Battery availability built-in
Hot-swap of built-in batteries no
Battery runtime (at 80% UPS load) 30 min
Battery runtime at 100% (50%) UPS load, min 20 (50)
Internal battery capacity, Ah 45
Number of built-in 12 V batteries, pcs. 20
Rated battery voltage, V 48
Battery type sealed, maintenance-free, lead-acid

Write to us

We will reply to info@levrus.ru shortly