The single-phase redundant SHTYL Guarantir-1103R2 UPS is a modular rack-mount uninterruptible power supply system with an output power of 1500 VA / 1200 W. The device architecture is built on TIR8/12 rectifier-inverter modules with N+1 hot redundancy.
The UPS is designed to protect server, telecommunications, industrial and engineering equipment from any mains problems, providing stable, high-quality power around the clock.
Scope of delivery
The Garantir-1103R2 UPS includes one TIR8/12 rectifier-inverter module.
The SHTYL Garantir-1103R2 UPS is built using double-conversion technology (online). This operating principle provides:
- correct operation under input voltage fluctuations in the range 110-290 V without using batteries;
- automatic transfer to battery power without a pause or interruption of the power supply when the mains fails;
- supplying the load with stable voltage with a pure sine wave and stabilisation accuracy up to ±1.5%.
Redundancy
Connecting the optional TIR8/12 module to the UPS (not included in the basic scope of supply and purchased separately):
- creates an N+1 redundancy scheme in which an additional power module operates continuously alongside the main module and is ready to instantly take over the load if it fails (hot redundancy). Switching occurs automatically and without interruption of power to the consumers.
- increases power to 3000 VA / 2400 W when both modules operate simultaneously.
"Hot" redundancy of the power modules ensures uninterrupted operation of the UPS if one rectifier-inverter module fails. This advantage makes the Garantir-1103R2 indispensable for powering mission-critical equipment used at remote, low-maintenance or rarely serviced facilities, as well as at restricted-access facilities. The function improves the UPS fault tolerance.
"Hot" connection of an additional power module increases the UPS power during operation without disconnecting the load and the mains. When configuring the UPS, subsequent increases in load power and/or subsequent increases in autonomous operation time (expansion of the connected battery capacity) can be taken into account immediately.
Installation and connection
The Garantir-1103R2 UPS is designed for installation in a 19-inch rack or telecommunications cabinet. The device is attached to 19-inch rails and placed on a shelf or support angles (horizontal support brackets).
The device is connected to the mains via an IEC-C20 connector. IEC-C13 connectors (6 pcs) and an IEC-C19 socket are provided for the load.
Battery operation
The Garantir-1103R2 UPS has 16 built-in batteries with a total capacity of 36 Ah. At 80% load, the device will keep connected equipment running for 20 minutes. The battery array is charged at a voltage of 48 V and a current of up to 25 A.
Additional options
The following can additionally be connected to the Garantir-1103R2 UPS:
- SHTYL battery supervisor, ver.2;
- SHTYL network supervisor, ver.2.
Control
The PSC-300.03.02 controller as part of Garantir-1103R2 performs the functions of centralised control, monitoring and supervision of the entire uninterruptible power supply system. It coordinates the operation of the TIR8/12 rectifier-inverter modules, monitors the condition of the batteries and tracks the power supply parameters in real time.
Main tasks of the controller:
- control of the operation of power modules;
- input and output voltage monitoring;
- load current monitoring;
- battery charge management;
- logging of alarms and warnings;
- display of the system status on the display;
- remote monitoring via Ethernet and Mini-USB;
- event logging;
- configuration of UPS parameters and the redundancy system.
The Garantir-1103R2 UPS offers an excellent price/quality ratio compared with similar products from foreign vendors on the Russian power supply systems market.
- Specifications







