‎+7 (499) 500-24-60
Moscow, Udaltsova St., 81, bldg 2, office 6
Project solution UPS

SHTYL SR1102L (AT1) UPS

  • Brand: Shtil
  • Product Code: SR1102L-AT1
  • Availability: In stock

The single-phase UPS SR1102L (SHTYL) AT1 is designed for use at particularly critical facilities (including railway infrastructure and metro facilities) to protect 2 kVA/1.8 kW equipment against power outages and unstable mains voltage.

A number of improvements have been made to these UPS models to increase fault tolerance (due to their use at critical facilities).

Unlike standard devices, they have an extended warranty period of 3 years (36 months).

The SR1102L (SHTYL) AT1 is an online topology UPS with double conversion technology, thanks to which the device allows:

  • stabilise the input voltage over a wide range (90-295 V) with high accuracy (±2%) without switching to battery;
  • instantly and without interruption transfer the load supply to the battery when the mains voltage fails;
  • supply the load with a pure sine wave voltage.

Installation and connection

The SR1102L (SHTYL) AT1 is designed for installation in a 19-inch rack or telecommunications cabinet.

For powering the critical load, the following are provided: three C13 computer sockets and one C19 socket. The device is connected to the input mains via a C20 connector.

Standalone operation

The SR1102L (SHTYL) AT1 is equipped with built-in batteries (current 4 A) and a connector for connecting external batteries (up to 80 Ah), which provides autonomous operation of the load for 2 hours at 100% load.

Protection

The SR1102L (SHTYL) AT1 is equipped with electronic protection against:

  • short circuit;
  • sustained output overload;
  • internal overheating.

The UPS restores operation automatically after the cause of the electronic protection activation is eliminated.

In addition, the device is able to protect the load from high-frequency interference and impulse overvoltages (built-in varistor – 2 kV, 1/50 μs). The UPS also has emergency protection against operational faults, which when triggered either switches off the load or transfers it to the mains without interruption via the built-in bypass.

Indication

To monitor UPS operation, it is equipped with an intuitive LED indicator panel that does not require additional study of the operating documentation to diagnose the device status.

The device has the following indicators:

  • "Status" – notifies of the device operating mode;
  • "Overheating" – notifies of device overheating;
  • "Mains" – notifies of the mains status;
  • “Bypass” – notifies of switching to bypass/ECO mode;
  • "Battery" – shows the battery status;
  • load level and battery discharge indicator.

Monitoring facilities

The status of the SR1102L (Shtyl) AT1 UPS can be monitored both locally via the USB/RS-232 interfaces and remotely after installing an Ethernet adapter. These interfaces are located on the monitoring cards, which are installed in a special connector on the rear panel of the device.

Operation of the UPS with an installed monitoring card is conveniently monitored on a PC via a web browser or the Shtyl Device Manager (SDM) program.

Please note that the cards are not included in the basic configuration and are purchased separately.

  • Specifications

General specifications
Apparent power, kVA 2
Active power, kW 1,8
Form factor rack-mount
Number of phases 1 to 1
Topology on-line (double conversion)
Country of manufacture Russia
Input characteristics
Generator compatibility yes
Input mains type single-phase three-wire (L, N, PE)
Input power factor 0,99
Limiting input voltage range, V 90-295
Maximum input current, A 13,5
Operating input voltage range, V 175-295 at 100% load, 155-295 at 75% load, 120-295 at 50% load
Rated input frequency, Hz 50
Rated input voltage, V 220
Soft start yes
Permissible input frequency range, Hz 45-55
Permissible deviation of the lower input voltage limit in ECO mode and for the electronic bypass, % -5, -10, -15, -20, -25 (default: -20)
Permissible deviation of the upper input voltage limit in ECO mode and for the electronic bypass, % +5, +10, +15, +20, +25 (default: +20)
Output characteristics
Crest factor 3:1
Maximum output current, A 9
Output power factor 0,9
Output voltage type single-phase
Rated output frequency, Hz when operating from the mains - matches the mains frequency; when operating from the battery (user-set) - 50/60
Transfer time to battery mode from on-line mode, ms 0
Output voltage total harmonic distortion, % <2.5 with linear load, <4 with non-linear load
Rated AC output voltage, V 220
Output voltage waveform pure sine wave
Efficiency in online mode, % 95
Efficiency in battery mode, % 86
Output voltage stabilisation accuracy, % ±2
Output frequency stabilisation accuracy (when operating from battery), % ±0,2
Overload capacity (when operating in on-line mode or from batteries) 105-130% - for 60 s, 130-150% - for 1 s, more than 150% - for 0.2 s followed by switching to bypass
Transfer time to battery mode from ECO mode, ms 7
Efficiency in mains operation mode, % 99
Control panel and interfaces
Audible alarm battery mode, low voltage of internal and/or external batteries, battery disconnected/fully discharged/needs replacement, overload and UPS fault
Ethernet option (monitoring card required)
EPO pluggable screw terminal block, wire cross-section: 0.08-1.2 mm².
"Dry" contacts option (monitoring card required)
mini-USB option (monitoring card required)
RS-232 option (monitoring card required)
USB option (monitoring card required)
LED display display of the system operating status, 3 control buttons and indicators: status, overload, overheating
Connection
Input mains IEC-320-C20
Load (output sockets) IEC-320-C13 (3 pcs.), IEC-320-C19 (1 pc.)
Reliability and performance characteristics
Degree of protection against dust and moisture IP20
Installation indoor
Operating altitude, m up to 3000 m above sea level
Relative humidity, % from 0 to 80 (non-condensing)
Service life, years at least 10
Warranty period, months 36
Operating temperature range, °C from +5 to +40
Storage temperature range, °C from -40 to +40
Mechanical characteristics
Housing colour grey
Weight, kg 13
Rack mounting height, U 2
Overall dimensions HxWxD (unpacked), mm 89x483x440
Batteries (battery packs)
Battery availability external (option)
Rated battery voltage, V 72
Battery type sealed, maintenance-free, lead-acid
Battery service life, years up to 7 (depending on operating conditions)
Battery management functionality capacity calibration, tests (10-second, for a specified runtime, to full discharge), deep discharge protection, charge temperature compensation
Cold start yes

Write to us

We will reply to info@levrus.ru shortly