‎+7 (499) 500-24-60
Moscow, Udaltsova St., 81, bldg 2, office 6
Other UPS accessories

IC-SNMP/MODBUS monitoring card

  • Brand: Shtil
  • Product Code: IC-SNMP-MODBUS
  • Availability: Pre-order

The SHTYL IC-SNMP/MODBUS interface expansion board is intended for local or remote monitoring, configuration and testing of three-phase SHTYL UPS of the ST, SMR and SM series.

The front panel of the expansion board accommodates the following connectors:

  • Ethernet (TCP/IP adapter) – connection to a PC or network switch;
  • RS-485 – monitoring of external devices via a proprietary protocol.

Below the row of external connectors are the indication and control elements:

  • green LED 'Power' – indicates the UPS operating mode/status;
  • blue LED Communication – indicates the status of the interface between the UPS controller and the expansion board;
  • 'Reset' button – reboots the software and resets settings to factory defaults.

Monitoring and control via the IC-SNMP/MODBUS card can be performed using the dedicated ShtylDeviceManager software, which allows you to obtain information about the UPS status and its parameters, change settings and view the event log. Thanks to SNMP protocol support, notifications about important events can be configured to be sent to four user-selected IP addresses.

  • Specifications

General specifications
Country of manufacture Russia
Compatibility three-phase ST, SMR and SM series UPS
Accessory type monitoring cards
Number of phases of compatible UPS 3-in-3
Notifications trap messages, e-mail
Supported protocols SNMP/ NTP/ Modbus TCP/ Modbus RTU
Supported interfaces Ethernet, RS-485
Control panel and interfaces
LED indication "Power", "Communication"
Function keys 'Reset' button
Reliability and performance characteristics
Degree of protection against dust and moisture IP20
Installation into the internal UPS slot
Relative humidity, % no more than 80
Warranty period, months 24
Operating temperature range, °C 5-40
Mechanical characteristics
Weight, kg 0,1
Overall dimensions HxWxD (unpacked), mm 40x68x81
Overall dimensions HxWxD (packed), mm 220×155×50
Ethernet (TCP/IP adapter)
Supported Ethernet adapter protocols SNMP/ NTP/ Modbus TCP/ Modbus RTU
Ethernet adapter output connector type RJ-45
Signalling (dry contacts)
Output connector type pluggable screw terminal block, wire cross-section 0.08-1.2 mm²
RS-485
Permissible voltage of A and B contacts, within, V from -13 to +16.5

Write to us

We will reply to info@levrus.ru shortly