‎+7 (499) 500-24-60
Moscow, Udaltsova St., 81, bldg 2, office 6
Bypass modules and cabinets

SHTYL external bypass module EBM-03-RT

  • Brand: Shtil
  • Product Code: EBM-03-RT
  • Availability: Pre-order
16 900 ₽

The EBM-03-RT external bypass module is used together with UPS units of the SR and STR series with a power of 3 kVA. The device is designed for manual, uninterrupted transfer of the power supply of connected devices from the UPS to the input mains for configuration, servicing or replacement of the uninterruptible power supply.

The height of the EBM-03-RT is 2U. The unit is installed in 19-inch rack rails or a telecommunications cabinet.

Operating modes

The EBM-03-RT has three operating modes, each characterised by a specific state of contacts S1, S2 and S3:

  • UPS mode (main) – the load is connected to the UPS output, the UPS power circuits are connected to the supply mains (contacts S1, S3 closed, S2 open): This is the main mode: the load is powered by the UPS inverter; in the event of an inverter fault or overload, the internal electronic automatic bypass transfers the load to the mains.
  • SERVICE mode – the load is connected to the bypass mains of the external bypass module, the UPS output is disconnected, the UPS power circuits are connected to the supply mains. The UPS runs at no load (contacts S1, S2 closed, S3 open): Service mode is used for scheduled UPS maintenance as well as for commissioning.
  • BYPASS mode – the load is connected to the bypass mains of the external bypass module, the UPS output is disconnected, the UPS power circuits are disconnected from the supply mains. The UPS is completely de-energised (contact S2 closed, S1, S3 open): Bypass mode is used to replace current-carrying components or a faulty UPS.

Connection

Connection to the mains is made using terminal connections.

The module is also connected to the UPS input and output via terminal blocks.

For connecting the load, the following are provided: IEC-320-C13 (6 pcs) and terminals (L, N, PE).

Control and indication

The front side of the device provides:

  • bypass block diagram with LED indication showing the presence of voltage in the circuits;
  • cam switch handle for convenient switching of the device operating modes.
  • Specifications

General specifications
Form factor rack-mount
Operating modes UPS, service, bypass
Country of manufacture Russia
Compatibility single-phase UPS of the SR series with a capacity of 3 kVA
Accessory type external bypass modules and cabinets
Number of phases of compatible UPS 1 to 1
Neutral conductor switching yes
Transfer time (to bypass mode), ms 0
Operating mode switching three-position multi-section switch
Input characteristics
Input mains type single-phase, three-wire (L, N, PE)
Rated input frequency, Hz 50
Rated input voltage, V 220
Control panel and interfaces
LED indication voltage presence, 5 pcs
Connection
Input mains terminals
Load (output sockets) IEC-320-C13 (6 pcs.), terminals (L, N, PE)
Connector type for connecting to the UPS output terminals (L, N) (connection is made using the T – T cable supplied with the EBM module)
Connector type for connecting to the UPS input terminals (L, N, PE) (connection is made using the T – T cable supplied with the EBM module)
Fuse for IEC-320-C13 sockets 10 A
Reliability and performance characteristics
Relative humidity, % from 0 to 98 (non-condensing)
Warranty period, months 24
Operating temperature range, °C from +5 to +40
Storage temperature range, °C from -40 to +40
Mechanical characteristics
Weight, kg 3
Overall dimensions HxWxD (unpacked), mm 89x483x150

Write to us

We will reply to info@levrus.ru shortly