The BMRT-24-18 battery module is intended to increase the battery runtime of the single-phase STR500SL-18 UPS in floor/rack configuration with an output capacity of 500 VA /400 W. The device is a compact metal box in universal (floor/rack) configuration with a pre-installed BP-24-18/RT battery block with a capacity of 18 Ah.
Installation and connection
The battery module, like the UPS STR500SL-18, is designed for two installation methods:
- in a vertical position on the floor or a rack;
- in a horizontal position in a 19-inch rack or telecommunications cabinet (if the device is not mounted on a shelf, it is recommended to additionally purchase a rack mounting kit).
Up to 4 BMRT-24-18 modules can be connected simultaneously to the UPS STR500SL-18. Connection to the power source and other modules is made via a TD50A «Anderson» connector.
The BMRT-24-18 module is pre-fitted with one slide-out battery block BP-24-18/RT. Front access is provided for removing/installing the block without dismantling the module itself. The battery block is replaced in hot-swap mode, i.e. without disconnecting the UPS and the load.
Batteries
The nominal battery voltage in the module is 24 V. The BP-24-18/RT battery block of the BMRT-24-18 module houses four 12 V batteries with a capacity of 9 Ah. The total battery capacity is 18 Ah.
Autonomous operation
The table below shows the autonomous runtime provided by the STR500SL-18 UPS and the BMRT-24-18 battery module depending on the power supply load level.
- Specifications







