Controller PSC-200.03.02 is designed for operation as part of SHTYL power supply systems, inverters, inverter systems and climate-controlled cabinets. The device provides monitoring, control and supervision of the specified power supply systems.
The controller's front panel features a two-line LCD indicator, LED indicators for the main operating modes and a keypad for setting parameters. The controller is powered by 18-72 V DC (with a site supervisor) or 36-72 V DC (without a site supervisor) via two lines: main and backup. Remote control and monitoring are possible via a USB port, programmable "dry contacts", a TCP/IP adapter and a GSM modem (optional).
Controller PSC-200.03.02 provides:
- generation of control signals for power modules;
- receiving information from the power modules about the current status and parameters;
- display of the main operating modes of the power supply system;
- manual parameter configuration;
- monitoring and analysis of the power supply system state and generation of detailed warning and alarm signals;
- monitoring and control of the facility's climate system (if a climate control module or facility supervisor is present);
- remote retrieval of system parameter information and configuration of system parameters via Ethernet, USB, GSM interfaces (where the relevant hardware support is available);
- system state monitoring via dry contacts.
Monitoring of the power supply systems' status can be performed using the following protocols:
- "SHTYL" – provides full access to viewing parameters and changing system settings, supported via Ethernet (including GPRS) and USB interfaces;
- HTTP – provides read-only access to the main system parameters, supported via the Ethernet interface;
- SNMP provides access to viewing the main system parameters and changing the settings of the TCP\IP adapter, and is supported via the Ethernet interface.
For remote monitoring of the status and configuration of the power supply system parameters with the PSC-200.03.02 controller, the delivery set includes a PC software disc. The disc contains: the Power System Manager program, the USB driver, and the program description. The Power System Bases program is also intended for monitoring, allowing the history of parameter changes to be stored with the option to output their graphs. The program is supplied separately at the Customer's request.
- Specifications





