‎+7 (499) 500-24-60
Moscow, Udaltsova St., 81, bldg 2, office 6
Monitoring equipment

IC-SNMP/mini-USB monitoring card

  • Brand: Shtil
  • Product Code: IC-SNMP-MINI-USB
  • Availability: In stock
21 230 ₽

The SHTYL IC-SNMP/mini-USB interface expansion board is designed for local or remote monitoring, configuration and testing of SHTYL equipment:

  • SHTYL InStab series AC voltage stabilisers with a capacity of 6-20 kVA;
  • single-phase SHTYL UPS of the ST, SR, SW, STR series with a capacity of 0.25-10 kVA.

The expansion board's front panel features the following connectors:

  • mini-USB – connection to a PC;
  • Ethernet (TCP/IP adapter) – connection to a PC or network switch;
  • signalling (dry contacts) – inputs for monitoring external signals;
  • RS-485 – monitoring of external devices via a proprietary protocol;
  • 4P4C – connector for connecting the SHTYL TS-1 sensor measuring the air temperature inside or near the UPS/voltage stabiliser (sensor included in the scope of supply).

Below the row of external connectors are the indication and control elements:

  • green LED “Power” – indicates the operating mode/status of the UPS/voltage stabiliser;
  • blue LED 'Communication' – indicates the interface status between the UPS/voltage stabiliser controller and the expansion board;
  • the Reset button reboots the software and resets the settings to factory defaults.

Monitoring and control via the IC-SNMP/mini-USB module can be performed in two ways:

  • using the specialised ShtylDeviceManager software;
  • via the WEB interface using a browser.

With any connection option, it is possible to obtain information about the status of the UPS/voltage stabiliser and its parameters, change settings and view the event log. Thanks to SNMP protocol support, notifications about important events can be configured to be sent to four user-selected IP addresses.

  • Specifications

General specifications
Country of manufacture Russia
Compatibility floor-standing/rack-mounted inverter voltage stabilisers, single-phase UPS
Accessory type monitoring cards
Number of phases of compatible UPS 1 to 1
Notifications trap messages, e-mail
Supported protocols Web/ SNMP/ NTP/ Modbus TCP/ SMTP/ HID/ SHTYL
Supported interfaces Ethernet, Mini-USB, RS-485, dry contacts, 4P4C
Reliability and performance characteristics
Degree of protection against dust and moisture IP20
Installation into the internal slot of the voltage stabiliser or UPS
Relative humidity, % no more than 95
Warranty period, months 24
Operating temperature range, °C 5-40
Mechanical characteristics
Weight, kg 0,1
Overall dimensions HxWxD (unpacked), mm 40×68×65
Overall dimensions HxWxD (packed), mm 220×155×50
Ethernet (TCP/IP adapter)
Supported Ethernet adapter protocols Web/ SNMP/ NTP/ Modbus TCP/ SMTP/ SHTYL
Ethernet adapter output connector type RJ-45
Signalling (dry contacts)
Output connector type pluggable terminal block, wire cross-section 0.5-1.0 mm², (15EDGRC-2.5-06)
Maximum resistance relative to common, Ohm 35
Purpose of input dry contacts determined during configuration
Type and quantity 2 input
RS-485
Permissible voltage of A and B contacts, within, V from -13 to +16.5
Термоyesтчик
Temperature sensor output connector type 4P4C
mini-USB
Supported mini-USB interface protocols SHTYL/ HID Power Device
Mini-USB interface output connector type USB-A

Write to us

We will reply to info@levrus.ru shortly