‎+7 (499) 500-24-60
Moscow, Udaltsova St., 81, bldg 2, office 6
Monitoring equipment

IC-SNMP/Dry contacts monitoring card

  • Brand: Shtil
  • Product Code: IC-SNMP-DRY-CONTACTS
  • Availability: In stock
19 300 ₽

The IC-SNMP/Dry Contacts interface expansion board is designed for monitoring, configuration and testing of SHTYL UPS units with three-phase input and single-phase output with a capacity of 15 and 20 kVA (models ST3115L and ST3120L).

The expansion board's front panel features the following connectors:

  • Ethernet (TCP/IP adapter) – connection to a PC or network switch;
  • signalling via dry contacts in one of the variants (software-selectable): 2 inputs plus common – for monitoring external connections via the UPS; 2 outputs plus common – for transmitting alarm signals and UPS operating mode status.

The IC-SNMP/Dry Contacts module enables monitoring and control of an individual UPS via the specialised Shut Down Manager software. The software interacts with the UPS connected to the local network via the standard SNMP protocol. Using Shut Down Manager, you can change the adapter's network settings (IP address, mask, gateway), SNMP communication settings, SNMP notification recipient addresses, access password, run a short battery test, edit the assignment of signal relays and display the status of the monitoring dry contacts.

The Shut Down Manager software displays:

  • input/output voltage value;
  • input mains frequency;
  • battery voltage and status;
  • presence of the input mains;
  • presence of general UPS alarms.

The Shut Down Manager software also enables timely shutdown of the workstation when the batteries in UPS units equipped with the SHTYL Ethernet adapter module are discharged.

  • Specifications

General specifications
Country of manufacture Russia
Compatibility ST3115L and ST3120L UPS
Accessory type monitoring cards
Number of phases of compatible UPS 3-in-1
Notifications trap messages
Supported protocols SNMP
Supported interfaces Ethernet, dry contacts
Reliability and performance characteristics
Degree of protection against dust and moisture IP20
Installation into the internal UPS slot
Relative humidity, % no more than 95
Warranty period, months 24
Operating temperature range, °C 5-40
Mechanical characteristics
Weight, kg 0,05
Overall dimensions HxWxD (unpacked), mm 70×25×70.5
Overall dimensions HxWxD (packed), mm 220×155×50
Ethernet (TCP/IP adapter)
Supported Ethernet adapter protocols SNMP
Ethernet adapter output connector type RJ-45
Signalling (dry contacts)
Output connector type pluggable screw terminal block, wire cross-section 0.08-1.2 mm²
Purpose of input dry contacts determined during configuration
Purpose of output dry contacts determined during configuration (possible options: UPS fault, general alarm, mains failure, bypass mode activated, low battery charge)
Type and quantity 2 output or input (software-configurable)

Write to us

We will reply to info@levrus.ru shortly